Instruction/ maintenance manual of the product C1489M-E (01/01) Pelco
Go to page of 8
Pelco Manual C1489M-E (01/01) 1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
2 Pelco Manual C1489M-E (01/01) DESCRIPTION The DD5 Series Dome Drives are capable of 360 ° pan rotation, preset positioning, +2 to -92 ° tilt, and variable speed operation. Each drive has an integral receiver that supports Coaxitron ® and RS-422 controls.
Pelco Manual C1489M-E (01/01) 3 GREEN TA B RED TA B CAUTION: Make sure the dome drive locks into place. Pull down on the dome drive with moderate pressure to ensure that it stays in place. INST ALLA TION Step 1 - T ur n on power to the back box. The red LED will light.
4 Pelco Manual C1489M-E (01/01) T able B. Switch Settings for SW2 – P-T ype Control NOTE: For Coaxitron controls, SW2 is not used; set all switches OFF .
Pelco Manual C1489M-E (01/01) 5 T able C. Switch Settings for SW2 – D-T ype Control NOTE: For Coaxitron controls, SW2 is not used; set all switches OFF .
6 Pelco Manual C1489M-E (01/01) 129 ON OFF OFF OFF OFF OFF OFF ON 130 OFF ON OFF OFF OFF OFF OFF ON 131 ON ON OFF OFF OFF OFF OFF ON 132 OFF OFF ON OFF OFF OFF OFF ON 133 ON OFF ON OFF OFF OFF OFF ON .
Pelco Manual C1489M-E (01/01) 7 OPERA TION For operating instructions, refer to the SD5 Series Operation and Programming Manual for your system. Refer to the table below .
8 Pelco Manual C1489M-E (01/01) ® Pelco, the Pelco logo, Spectra, Genex, Legacy , PelcoVision and Coaxitron are registered trademarks of Pelco. © Copyright 2001, Pelco. All rights reserved. ™ Esprit, Camclosure, and LowLight are trademarks of Pelco.
An important point after buying a device Pelco C1489M-E (01/01) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1489M-E (01/01) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1489M-E (01/01) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1489M-E (01/01) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1489M-E (01/01) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1489M-E (01/01), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1489M-E (01/01).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1489M-E (01/01). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1489M-E (01/01) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
