Instruction/ maintenance manual of the product c1448m-c Pelco
Go to page of 8
DF8A Series Fixed Indoor Dome Installation/ Operation Manual C1448M-C (8/02) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or.
2 Pelco Manual C1448M-C (8/02) IMPOR T ANT SAFEGUARDS AND W ARNINGS Observe the following W ARNINGS before installing and using this product. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
Pelco Manual C1448M-C (8/02) 3 DESCRIPTION The DF8A Series Fixed Dome is for indoor use in hard ceiling or standard 2 x 2 ft (6 x 61 cm) suspended ceiling installations. Products in the DF8A Series have an aluminum back box and a plastic, hemispherical viewing dome.
4 Pelco Manual C1448M-C (8/02) IN-CEILING MODELS HARD CEILING INST ALLA TION 1 PREP ARE CEILING Locate the center point of the mounting location. Drill a hole in the ceiling using a 3/32-inch drill. Insert the compass tool into the hole. Use a pencil and the compass tool to draw a circle on the ceiling.
Pelco Manual C1448M-C (8/02) 5 NOTE: The ceiling tile cannot be thinner than 0.50-inch (1.27 cm) or thicker than 1.75 inches (4.45 cm). AT T ACH SAFETY CHAIN HERE CEILING SUSPENDED CEILING INST ALLA TION 1 PREP ARE CEILING TILE Remove the ceiling tile from the ceiling.
6 Pelco Manual C1448M-C (8/02) W ire Gauge Maximum distance from transformer to load T able B. 24 V AC Wiring Distances The following are the recommended maximum distances for 24 V AC applications and are calculated with a 10-percent voltage drop. (T en percent is generally the maximum allowable voltage drop for AC-powered devices.
Pelco Manual C1448M-C (8/02) 7 DOME INST ALLA TION 1. Snap the clip, on the end of the trim ring leash, into the hole on the lip of the back box. 2. Install the dome by pushing the two ball studs on the trim ring into the retaining clips on the back box.
REVISION HISTOR Y Manual # Date Comments C1448M 6/96 Original version. 7/96 Added models DF8-2 and DF8-3. 7/97 Maximum camera and lens dimensions changed per P AR 97031. 2/98 Added DF8-1 model. Revised Sections 3.0, 4.0 and 5.0. Updated manual to new format.
An important point after buying a device Pelco c1448m-c (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco c1448m-c yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco c1448m-c - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco c1448m-c you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco c1448m-c will certainly help you make a decision on the purchase.
If you already are a holder of Pelco c1448m-c, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco c1448m-c.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco c1448m-c. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco c1448m-c along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
