Instruction/ maintenance manual of the product C1303M-B Pelco
Go to page of 12
® ExSite ™ Series Explosionproof Camera Module INSTALLATION C1303M-B (5/05).
.
C1303M-B (5/05) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions.
4 C1303M-B (5/05) Getting Started Thank you for purchasing Pelco’ s ExSite ™ Series explosionproof integrated positioning system. This manual includes instructions for installing the camera module for the ExSite Series system. For complete system installation instructions, refer to the installation manual placed in the pan and tilt box.
C1303M-B (5/05) 5 Installation To install the camera module do the following: 1. Refer to Figure 1. Loosen the set screw at the back of the enclosure with the provided 1.5 mm Allen wrench. Figure 1. Loosen Setscrew 2. Use the supplied spanner wrench to loosen the back of the camera enclosure (refer to Figure 2).
6 C1303M-B (5/05) 3. Slide the camera module into the enclosure. Refer to Figure 3 to position the camera module properly in the enclosure. Carefully mate the camera’ s power connector to the mating connector located inside the enclosure.
C1303M-B (5/05) 7 4. Refer to Figure 5 and do the following to install the arm of the wiper: a. Place the supplied green bushing on the stud located behind the handle of the camera module. The bushing should be in the same orientation as shown in Figure 5.
8 C1303M-B (5/05) Maintenance CAMERA MODULE REPLACEMENT The ExSite camera module can be replaced only with a camera module with the same model number . If a different camera model is installed in an existing system, the system will not function and a message to contact the Pelco factory will appear on the screen.
C1303M-B (5/05) 9 3. For models with wipers, also remove the wiper arm and the green bushing from the unit (see Figure 7). 4. Slide the camera module out of the enclosure. 5. Install the new camera module by doing the following: Slide the camera module into the enclosure.
10 C1303M-B (5/05) 6. Refer to Figure 7 and do the following to reinstall the arm of the wiper: a. Reinstall the green bushing on the stud located behind the handle of the camera module. b. Reinstall the wiper arm. Place the ridge of the arm in the notch of enclosure tab and the slot of the arm over the green bushing.
C1303M-B (5/05) 11 Specifications *Manual control of camera setup functions can be done with CM6700, CM6800, CM8500, CM9500, CM9740, CM9760, CM9770, CM9780, KBD200A, KBD300A, and MPT9500 controllers, but not with CM7500, MPT9000, or KBD9000 controllers.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C1303M-B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1303M-B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1303M-B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1303M-B you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1303M-B will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1303M-B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1303M-B.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1303M-B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1303M-B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
