Instruction/ maintenance manual of the product C10CH-6X Pelco
Go to page of 2
C2947M-D (6/08) C10CH Series Camera Quick Start Guide This quick start guide describes how to install a nd configure the C10CH Series camera in most applications. It contains a representation of the setup menus to help you locate and change specific settings.
C2947M-D (6/08) MOUNT The C10CH Series camera can be mounted from either the top or bottom, depending on the type of camera mount used in your installation. Use a standard 1/4-20 screw . The maximum thread depth is 0.25 inches (6.4 mm). POWER Connect 12 VDC or 24 VAC power to the back of the camera using the supplied terminal block.
An important point after buying a device Pelco C10CH-6X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C10CH-6X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C10CH-6X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C10CH-6X you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C10CH-6X will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C10CH-6X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C10CH-6X.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C10CH-6X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C10CH-6X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center