Instruction/ maintenance manual of the product C10CH Pelco
Go to page of 32
INSTALLATION/OPERATION C2946M-E (1/09) C10CH Series Camera Color , Ultra High Resolution.
.
C2946M-E (1/09) 3 Contents Important Safe ty Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Regulatory Notices .
4 C2946M-E (1/09) List of Illustrations 1 C10CH Series Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 DC Drive Auto Iris Lens Connector .
C2946M-E (1/09) 5 WAR N I NG : TO PREVENT RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS CA MERA TO RAIN OR MOISTURE. PRECAUTION: DO NOT REMOVE ANY COVER WHIL E THE CAMERA IS OPERA TING. P AL: USE ONL Y RECOMMEN DED POWER SUPPL Y , 220 TO 240 VAC, 50 Hz. CAUTION: LENS MOUNT OF THE CAMERA IS “CS” MOUNT .
6 C2946M-E (1/09) Important Safety Instructions 1. Read Instruct ions. All the safety and oper ating instructions should be read before the camera is oper ated. 2. Retain Instruct ions. The safety and operating instructions should be ret ained for future referen ce.
C2946M-E (1/09) 7 Regulatory Notices This device co mplies with Pa rt 15 of th e FCC Rules. Oper ation is subjec t to the following two co nditions: (1) this device may n ot cause ha rmful interference, and (2 ) this device must accept any interfere nce received, including interfere nce that may cause undesired operat ion.
8 C2946M-E (1/09) Description The C10CH Ser ies camera is a compact, ult ra high re solution camera that featur es a 1/3-inch CCD imager . Its ultra high resoluti on and high- density image sensor pro duces superi or images. On-screen prog rammable menus can be accessed using the side panel button .
C2946M-E (1/09) 9 Camera Layout Figure 1. C10 CH Series Came ra ì Camera Mount: Use the top or botto m mount hole. The maximum thread dept h is 0.25 inches (6.4 mm). Refer to Camera Mounting on page 11. î Back Focus Locking Screw: Use a 1.5-mm Alle n wrench t o adjust th e back focus (refer to Lens Focusing on page 25).
10 C2946M-E (1/09) Installation LENS MOUNTING The C10CH Ser ies camera supports bot h manual and auto iris lenses, eith er fixed fo cal length o r varifocal. It also supp orts bot h DC an d video drive lenses. It automatically se nses an auto iris lens a s soon as you plug in the connector .
C2946M-E (1/09) 11 CAMERA MOUNTING The C10CH Series camera can be mou nted from either the top or bottom, de pending on the type of camera mount used in yo ur instal latio n. Use a standard 1 /4-20 screw. The maximum thread dept h (top) is 0.1 88 inches (4 .
12 C2946M-E (1/09) CONNECTING POWER The C10CH Se ries camera i s designed to opera te from e ither a 12 VDC or a 24 VAC power sour ce. The camer a automatic ally senses p ower type. Use only a Class 2 isolated power source that can supp ly 12 VDC ±15% or 24 V AC ±15%, 50/60 Hz.
C2946M-E (1/09) 13 CONNECTING AC POWER The C10CH Series came ra requires a power supply of 24 V AC ±15% (20.4 t o 27.6 VA C), 50/60Hz. Make sure the power supply ha s a mi nimum rating of 270 mA.
14 C2946M-E (1/09) CONNECTING DC POWER The C10CH Ser ies camera r equires a po wer supply of 12 VDC ±15% (10.2 to 13 .8 VDC). Make su re the power supply has a minimum rat ing of 390 mA. T o connect D C power refe r to Figure 5, and then complete th e followi ng steps: 1.
C2946M-E (1/09) 15 Accessing the Setup Menus Use the 5-p osition bu tton contr oller on t he side pane l of the camera to access and navigate the on-scree n display (OSD) menus ( refer to Figure 6 and T able C). Figure 6. Side Panel Button Options T o display a menu, comple te the foll owing steps: 1.
16 C2946M-E (1/09) Setup Menus The C10CH Ser ies camera us es setup me nus instead of hardware s witches for co nfiguring the camera. A s a result, y ou have more op tions for customizing the camera for its specific application. NOTE: After you c ustomize any aspect of t he C10CH Seri es camera, be sure to sav e your custo m settings .
C2946M-E (1/09) 17 MAIN MENU The following sections de scribe each menu and the sett ings assoc iated with tha t menu. The sa mple screens in each section show the de fault sett ings.
18 C2946M-E (1/09) PROFILES Use this opt ion to select a profile or save custom s ettings. U se profiles for faster installatio n or to adjust came ra settings q uickly for changing lig ht conditions. The defa ult setting is ST ANDARD. The C10CH Series came ra offers four predefined profiles and one custom, or user -defin able, profile.
C2946M-E (1/09) 19 EXPOSURE SETTINGS Select this option to config ure the exposure settings for th e C10CH Series camera. AUTO EXPOSURE The automat ic exposure feature au tomaticall y adjusts th e electronic shutter an d mechanical iris to set the correct exposu re.
20 C2946M-E (1/09) DC IRIS LEVEL Select this opt ion to adjust th e electron ic propertie s of the DC drive au to iris lens to th e auto iris ele ctronic prop erties of the camera . Perform this procedure be fore using th e camera or each time you cha nge the lens.
C2946M-E (1/09) 21 FUNCTION SETTINGS Select this option to config ure the function settings fo r the C10CH Series camera. LINE SYNC Use line synchr onization to elimin ate the vert ical roll that occ urs when multipl e cameras are co nnected to the same switching device.
22 C2946M-E (1/09) GAMMA Gamma corre ction ad justs the v ideo signa l to compensa te for t he nonline ar response of the moni tor displa y . Select one o f the fo ll owing option s: 60%(NORM) or 100%. The d efault sett ing depend s on the sele cted profi le (refer t o T able D on page 18).
C2946M-E (1/09) 23 T I TLE Select this option to configure the camera title. TITLE: Use this option to e nable or disable th e title d isplay . The de fault set ting is OFF . EDIT TITLE: Use this option to enter or edit the camera title, up to 16 char acters.
24 C2946M-E (1/09) SYSTEM INFORMATION Select this option to disp lay the camera firmware informa tion. Restore Factory Settings Select this option to reset the camera to the factor y default settin gs.
C2946M-E (1/09) 25 Lens Focusing After mounting the lens, you must focus your C10CH Series camera . Y ou will adjust both the back focus (on the camera) and the f ine focus (on the lens). NOTE: The back focus has already b een adjusted using a standard CS mount len s.
26 C2946M-E (1/09) 6. V arifocal lens only: a. Set the varifocal to wide (W) and the lens fo cal length to far ( ∞ ). b. Adjust the back focu s: (1) Use a 1.5-mm Allen wrench to lo osen th e back fo cu s locking screw . (2) T urn the lens until the image is focused .
C2946M-E (1/09) 27 Camera Synchronization Camera synchr onization may aff ect installat ions that u se two or more AC power supplies for multiple cameras. Due to differe nt p ower phas es, a brief ver tical roll may appear o n the moni tor when s witching be tween camera s.
28 C2946M-E (1/09) Manual White Balance Calibration In some installations, use manu al white balance to render the most accur ate image color possible. Mixed color applications may affect the amount of colo r adjustment . For examp le, a small wh ite object on a large bl ue surface may have a re ddish tint.
C2946M-E (1/09) 29 Specifications GENERAL Imaging Device 1/3-inch interline tr ansfer CCD Picture Elements NTSC 768 (H) x 494 (V) (approx. 380k) P A L 752 (H) x 582 (V) (approx.
30 C2946M-E (1/09) ENVIRONMENT AL Operating T emper ature 14° to 122°F (-1 0° to 50°C) Storage T emperatur e -4° to 140°F (-20° to 60°C) Operating H umidity 20% to 80% (nonconden sing) Storage Humid ity 20% to 90% (nonconden sing) PHYSICAL Dimensions C10CH-6/C10CH-6X 2.
The materials used in the manufacture of this documen t and it s components are compliant to the requirements of Directive 2002/9 5/EC. This equipment contains elec trical or electronic components tha.
Pelco, Inc. Worldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .
An important point after buying a device Pelco C10CH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C10CH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C10CH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C10CH you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C10CH will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C10CH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C10CH.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C10CH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C10CH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
