Instruction/ maintenance manual of the product C1005M-G Pelco
Go to page of 12
ICI1000PIM Personality Interface Module C1005M-G (10/02) ® INST ALLA TION/OPERA TION.
2 C1005M-G (10/02) GENERAL UNP ACKING INSTRUCTIONS Unpack and inspect all parts carefully . The following items are supplied: 1 ICI1000PIM Personality Interface Module 1 RJ-14 cable for Inter -Check .
C1005M-G (10/02) 3 INST ALLA TION NOTE: The information in this manual is for PIM software version 4.02 and above. INST ALLA TION FOR INTER-CHECK Refer to the ICI1000S Inter -Check manual as you install the ICI1000PIM. 1. Configure DIP switch bank 1 on the PIM (refer to Configuring DIP Switch Bank 1 section).
4 C1005M-G (10/02) Figure 2. Configuration for Wiring ICI1000PIM Module WHITE BLUE BLACK YELLOW RED GREEN WHITE BLUE BLACK YELLOW RED GREEN STRAIGHT -THROUGH PHONE CABLE TO INTER-CHECK UNIT USER-SUPPL.
C1005M-G (10/02) 5 INST ALLA TION FOR DX2000 DVR AND DX2000DH DA T A HUB Refer to Figure 3 and the DX2000 Digital Video Recorder Installation/Operation Manual (C690M) and DX2000DH Data Hub Manual (C698M) as you install the ICI1000PIM.
6 C1005M-G (10/02) Figure 4. ICI1000PIM Switch Locations 12 3 4 5 67 8 ON 12 3 4 5 67 8 REGISTER/INTERF ACE I PUT N BANK 1 BANK 2 D ATA POWER ON CONFIGURING DIP SWITCH BANK 1 The switches in this bank serve several purposes.
C1005M-G (10/02) 7 Table A. PIM Address Settings for Switch Bank 1 + = OPEN (FLIP THE SWITCH DOWN) – = CLOSED (FLIP THE SWITCH UP) SWITCH # 45678 POLLING PIM ADDRESS (PIM #) – –––– 1 –.
8 C1005M-G (10/02) Table B. Cash Register/Interface Configurations + = OPEN (FLIP THE SWITCH DOWN) X = POLLING/NON-POLLING R = RECEIPT (Normally CLOSED = – ) – = CLOSED (FLIP THE SWITCH UP) – = .
C1005M-G (10/02) 9 Table B. Cash Register/Interface Configurations (Continued) Register/Interface T ype Bank 1 Switch Bank 2 Switch 123 12345678 P ANASONIC JS-6500 Dot Matrix Printer - X G + - - + + -.
10 C1005M-G (10/02) SPECIFICA TIONS ELECTRICAL Power Input V oltage: 120 V AC, 60 Hz to wall mounted transformer (5 VDC, 300 mA from transformer to ICI1000PIM) Connectors: One 16-pin interface connect.
C1005M-G (10/02) 11 W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco C1005M-G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1005M-G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1005M-G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1005M-G you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1005M-G will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1005M-G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1005M-G.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1005M-G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1005M-G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
