Instruction/ maintenance manual of the product AD2088 Pelco
Go to page of 44
INSTALLATION/OPERATION C2688M-C (12/08) Interface for AD2088 Keyboard Endura ® EDI5000-AD2088 Data Interface.
.
C2688M-C (12/08 ) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description .
4 C2688M-C (12/08) List of Illustrations 1 Sample System Usin g Endura to Reco rd Matrix Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Sample System Usin g Endura to E xpand Video Capacity .
C2688M-C (12/08 ) 5 Regulatory Notices REGULA TORY NOTICES This device co mplies with Pa rt 15 of the FCC Rules. Operat ion is subject to the following two conditions: (1) this device may n ot c ause harmful interference, and (2 ) this device must accept any interference received, including interfe rence that may cause undesire d operat ion.
6 C2688M-C (12/08) Description The EDI5000 Endura ® data int erface pr ovides a fl exible integ ration plat form betwee n third-pa rty systems an d the Endu ra IP video s urveillance platform.
C2688M-C (12/08 ) 7 IMPORT ANT NOTE. PLEASE READ The networ k implementa tions are s hown as gene ral represe ntations on ly and are not intended to show detail ed network topologies . Y our actual network will differ , requiring changes or per h aps additional netw o r k equipment to accommod ate the systems as illustrated.
8 C2688M-C (12/08) FRONT AND REAR PANELS Figure 3 illustrates the front and rear panels of the da ta interface (refer to Front Panel Indicators on page 33 for a d escription of the front panel LEDs; refer to Basic Hard ware Connecti ons on page 14 for a descripti on of the rea r panel con nectors).
C2688M-C (12/08 ) 9 Installation HARDWARE INSTALLATION OVERVIEW The following steps prov ide an overvi ew of how to ins tall the dat a interfac e: 1. Install all components of th e matrix switching system (ref er to the matrix system do c umentation for instructions).
10 C2688M-C (12/08) USER -SUPPLIED PARTS In additi on to the sta ndard tools and cables r equired fo r a video se curity insta llation, yo u need to p rovide the following ite m s: PRODUCT SERIAL NUMB.
C2688M-C (12/08 ) 11 Figure 5. EDI5000 Data Interface Desktop Placement WALL MOUNT INSTALLATION The data interface can be mounted to a wall using the opti onal WM5001-4U wall mount system.
12 C2688M-C (12/08) 3. T ighten the thumbs crew on the wall mount to secure the unit (refer to Figure 7 ). Figure 7. T ighten the Thumbscrew to Secure the Unit RACK MOUNT INSTALLATION Y ou can mount t.
C2688M-C (12/08 ) 13 3. T ighten the thumbs crew on the rack moun t to secure the unit into the rack (refer to Figure 9). Figure 9. T ighten Thumbscrew to Secure the Unit PELCO BADGE ORIENTATION The Pelco badge on the fron t panel of the data interface can be rotate d in quarter turns.
14 C2688M-C (12/08) BASIC HARDWARE CONNECTIONS CONNECTING THE MATRIX S YSTEM TO THE EDI5000 Figure 11 shows how to wire the te rminal block and connect it to the data interface. No te that the termin al block can be attach e d to the data interface only in the prop er position.
C2688M-C (12/08 ) 15 5. Connect the wires at the ot her end to the wall block that is provided with the AD208 8 keyboard. Figure 12. Connecting the EDI5000 to the AD2088 Keyboard IMPORT ANT NOTE: PLEASE READ. The network implem entation is shown as a ge ner al represen tation onl y and is not intended to show a deta iled network topology .
16 C2688M-C (12/08) NETWORK CONNECTION NOTE: Consult your network administrato r before installing the data interface to avoid possib le network conflicts. Use the network port on th e front panel and a Cat5e (or bette r) ca ble with RJ-45 connectors to con nect the data interface to yo ur system network.
C2688M-C (12/08 ) 17 Power Supply Options The EDI5000 o ffers a single 4-pi n power connect or on the rear panel. The RK5100P S-5U rack mount kit and the NET53 01PS power sup ply attach to this conn ector . When using a d ifferent power supply, attach power to th e enclosed 4-pin to 2- pin adapte r and atta ch the adap ter to the unit.
18 C2688M-C (12/08) 5. When prompted wit h installation options, make sure to uncheck both check boxes. Figure 16. Bonjour Setup Screen When the instal lation is fin ished, Bonjou r Service wil l be installe d on the PC. If problems with the discovery ev er arise, this service s hould be the first step in solving proble ms.
C2688M-C (12/08 ) 19 3. After the EDI5000 is con figured correctly , and you are on the same network, ED I5000 appears in the task pa ne. Double-click th e name to display the E DI5000 login page.
20 C2688M-C (12/08) Software Configuration SOFTWARE CONFIGURATION OVERVIEW Once the hardware is installed and all de vices are connec ted, complete the following sof tware configuration tasks: 1. Configur e the data inte rface settings thro ugh the EDI5000 syste m configuration software .
C2688M-C (12/08 ) 21 CONNECT TO THE SYSTEM CONFIGURATION SOFTWARE 1. From the E ndura worksta tion (or from a ny other co mputer connect ed to the En dura networ k) open a Web brows er window . Th e EDI50 00 system config uration softwa re is compatibl e with the follo wing Web browsers: • Microsoft I nternet Ex plorer 6.
22 C2688M-C (12/08) CONFIGURE THE DATA INTERFACE SETTINGS 1. The EDI 5000 system conf iguration software op ens to the Sett ings page a nd Configurat ion tab. T o ch ange any ot her settin gs (such as th e network settings or N VR settin gs), click one o f the othe r tabs on t he Settings page.
C2688M-C (12/08 ) 23 SAVE CHANGES TO THE EDI5000 CONFIGURATION When changing sett ings in the EDI5000 system configuratio n software, you must save or apply the changes befo re you leave the pa ge; if you leave the page wit hout saving changes, the configuratio n settings revert to the previously saved settings an d your changes are lost.
24 C2688M-C (12/08) Change Serial Port Settings Use the Configura t ion page in the EDI500 0 system configuration softw are to con figure the serial port connection as shown in Fig ure 24. Figure 24. EDI5000 Serial Port Settings Change General Co nfiguration Settings Figure 25.
C2688M-C (12/08 ) 25 WS5000 Advanc ed System So ftware Opera tion manual (C1624M) for instr uctions on configuring alarms in the Endura system. Refe r to the matrix system d ocumentation for instruc t ions on config uring matrix alarms. NOTE: Endura system camera s should not be calle d by alarms configure d in the matrix syst em.
26 C2688M-C (12/08) 2. In the Hostname box type an easily recogn izable name that id en tifies the d ata interf ace on the network. Shor t names are recom mended. 3. Y ou can chang e the IP Address, Subnet Mask, or Gateway settin gs. Do not change the DHCP setting or the DNS Servers informatio n; these settings are re served for fut ure use.
C2688M-C (12/08 ) 27 Add a Recorde r to the EDI5000 Configura tion Use the Create Ne w NVR Entry section to ad d a recording device entry to the EDI5000 configuration.
28 C2688M-C (12/08) CONFIGURE DECODER -MONITOR SETTINGS Click the Deco der -M onitor Settin gs tab to op en the Deco der - Monito r settings page. Us e this page to identi fy the analog conn ecti on between each Endur a decoding devi ce and the ma trix system.
C2688M-C (12/08 ) 29 Edit a Decoder M onitor Entry in the EDI5000 Configuration The Decoder -Monitor Friendly Name section contain s a list of Endura decoding device s that have already been adde d to the EDI500 0 configurat ion. Use the Ed iting Decode r Monitor Info section to edit th ese devices (r efer to Fi gure 27 on page 27).
30 C2688M-C (12/08) SOFTWARE UPDATE OPTIONS The Software Upd ate page allows you to upd a te the EDI5000 syste m configuration software, as follo ws: 1. Click the Software Up date link to open the Software Update pag e. 2. Click Browse to locate the update file (s pecific details, suc h as the filename [*.
C2688M-C (12/08 ) 31 EXPORT CONFIGURATION SETTINGS Use this option to save configurat ion settings from the EDI5000 to an xml file tha t can be imported to anothe r EDI5000 data int erface unit in thesystem (as described in Import Configur ation Settings on page 32).
32 C2688M-C (12/08) IMPORT CONFIGURATION SETTINGS Use this opt ion to import E DI5000 conf iguration s ettings from t h e xml file that is generated by the expor t option (described in Export Configurat ion Settings on page 3 1). 1. Click “Import selected configurat ion setting s” and then click Browse.
C2688M-C (12/08 ) 33 Operation FRONT PANEL INDICATORS Figure 36. EDI5000 Front Panel Network Activity Indicator The network act i vity indicator flashes g reen when the data interface is sending or re ceiving network data.
34 C2688M-C (12/08) RESET BUTTON The reset butto n is located at the top of the front pane l. Using a probe or paper clip, p ress the reset button to reboot the ED I500 0 as follows: • Reboot the EDI5000 : Press and immedi ately releas e the reset b utton to reb oot the EDI 5000.
C2688M-C (12/08 ) 35 Figure 37. Operating the EDI5000 wi th the AD2088 Keyboard V IEWING AND CONTROLLING VIDEO T o vi ew live video from the matrix system, use t he matrix sys tem commands an d keyboard opt ions (refer t o the matri x system docu men tation).
36 C2688M-C (12/08) Controlling Recorded Video Figure 38 illustrates the joystick options for controlling reco rded video when viewing at normal ma gnification (refer to Using Digit al Zoom on page 38 for i nstructions on viewing in digital zoom mode).
C2688M-C (12/08 ) 37 Fast Forward Speeds When you pre ss Far (Fast F orward) or mo ve the joyst ick to the r ight, the r ecorded vide o plays at 2 x speed. Pre ssing Far again i ncreases the fast forward speed. T able D identifies th e fast forward progressio n (refer to Playba ck Speed for an expl anation of the abbre viations).
38 C2688M-C (12/08) Rewind Speeds When you press Near (Re wind) or move the joystick left, the recorded video plays in reverse at 2x spee d. Pressing Near again in creases the speed at whic h the video plays in reve rse.
C2688M-C (12/08 ) 39 T roubleshooting LED indicato rs on the f ront panel of t he EDI5000 a llow you to mon itor data act ivity and op erating po wer .
40 C2688M-C (12/08) Specifications MODEL EDI5000-AD2088 Interface that allows serial data co mmunica tion between an America n Dynamics matrix syst em and the Endura vide o and recor ding system.
C2688M-C (12/08 ) 41 ST ANDARDS/ ORGANIZA TIONS • Pelco is a member of the MP EG-4 Industry Foru m • Pelco is a memb er of the Univ ersal Plug and Play (UPnP) Fo rum • Pelco is a member of the U.
42 C2688M-C (12/08).
PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without c harge, any merchandise proved defective in material or workmanship for a pe riod of one year after the date of shipment.
Pelco, Inc. Worldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .
An important point after buying a device Pelco AD2088 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco AD2088 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco AD2088 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco AD2088 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco AD2088 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco AD2088, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco AD2088.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco AD2088. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco AD2088 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
