Instruction/ maintenance manual of the product 200 Pelco
Go to page of 16
200 Series Flat Panel LCD Monitors INST ALLA TION/OPERA TION C2925M-A (1/06).
.
C2925M-A (1/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices .
4 C2925M-A (1/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
C2925M-A (1/06) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
6 C2925M-A (1/06) Description The 200 Series LCD monitors provide high resolution display of VGA signals. These 17- and 19-inch monitors use a color , thin film transfer (TFT) active matrix 1280 x 1024 LCD panel that automatically adapts to the appropriate input resolution.
C2925M-A (1/06) 7 Installation The monitor can be placed on any flat surface (desk or table), or it can be rack mounted or wall mounted. NOTE: Only use a recommended rack mount kit, such as PMCL-RM17, PMCL-RM19, or PMCL-WM. T o rack-mount the monitor , follow the instructions supplied with the rack mount kit.
8 C2925M-A (1/06) Operation FRONT PANEL CONTROLS Figure 2. Front Panel Controls 1. This button automatically selects the input signal. 2. This button decreases the value of a selected menu item or opens the V olume menu and decreases volume. 3. This button increases the value of a selected menu item or opens the V olume menu and increases volume.
C2925M-A (1/06) 9 OSD CONTROL MENUS Unless otherwise noted, the menus are the same for the PMCL217 and PMCL219. T o use the menus: 1. Press the menu button to access the Main menu. 2. Use the up and down arrow buttons to highlight a selection. 3. Press the menu button to select an item.
10 C2925M-A (1/06) DISPLAY ADJUST MENU Figure 4. Display Adjust Menu Display Adjust Menu Field Definitions V-Position: Moves the screen image up or down. H-Position: Moves the screen image left or right. Pitch: Adjusts image distortion appearing as vertical bars or noise on the screen.
C2925M-A (1/06) 11 OSD ADJUST MENU Figure 6. OSD Adjust Menu OSD Adjust Menu Field Definitions OSD H-Pos: Moves the OSD menu box left or right. OSD V-Pos: Moves the OSD menu box up or down. OSD T imer: Sets the number of seconds the menu remains on the screen.
12 C2925M-A (1/06) Maintenance If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and cable runs. T o reduce the risk of electrical shock, do not remove the cover or back of the monitor .
C2925M-A (1/06) 13 Supported Input Modes Mode Resolution H Freq (kHz) V Freq (Hz) 0 720 x 350 31.469 70.087 1 640 x 480 31.469 59.940 2 640 x 480 35.000 66.667 3 640 x 480 37.861 72.809 4 640 x 480 37.500 75.000 5 720 x 400 31.469 70.087 6 800 x 600 35.
14 C2925M-A (1/06) Specifications MODELS PMCL217 17-inch (432 mm) active TFT LCD monitor PMCL219 19-inch (483 mm) active TFT LCD monitor GENERAL LCD Panel Pixel Array 1280 X 1024, 75 Hz Panel Aspect Ratio 5:4 VGA Viewing Area PMCL217 338 x 270 mm PMCL219 376 x 301 mm Pixel Pitch PMCL217 0.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco 200 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco 200 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco 200.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
