Instruction/ maintenance manual of the product 10P08 Pelco
Go to page of 12
IOP08 Series Inter cept ® Camera and Lens Installation/ Operation Manual C1441M-D (1/98) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.
2 Pelco Manual C1441M-D (1/98) CONTENTS Section Page 1.0 GENERAL3 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 3 2.0 DESCRIPTION .......................................................................................... 4 2.1 MODELS .
Pelco Manual C1441M-D (1/98) 3 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
4 Pelco Manual C1441M-D (1/98) 2.0 DESCRIPTION The IOP08 Series of cameras and lenses is part of the IDS08 Intercept ® Series of domes. The IDS08 Series is an integral system that includes a back box (BB08), dome drive (DD08), dome receiver/driver (DRD08), and imager/optics package (IOP08).
Pelco Manual C1441M-D (1/98) 5 3.0 INST ALLA TION The camera and lens package are installed at the factory . 3.1 ADJUSTMENTS Y our optics package comes from the factory adjusted for a broad range of lighting conditions.
6 Pelco Manual C1441M-D (1/98) ➤ Auto Iris Level is adjusted using a video meter to provide a video signal output of be- tween 130 and 142 IRE (Institute of Radio Engineers; 1V p–p = 100 IRE’s) when lighting from skylights, low pressure sodium lights and fluorescent lights are present.
Pelco Manual C1441M-D (1/98) 7 3.1.5 V -Phase (V er tical Phase) V -Phase (V ertical Phase) is valuable when multiple optic packages are switched by a sequential or matrix switcher . The vertical phase +/- buttons are used to compen- sate for vertical phase discrepancies which will occur in a multiple camera environ- ment.
8 Pelco Manual C1441M-D (1/98) Figure 3. Black and White Camera Adjustments T able A. Shutter Speeds Shutter Shutter Speed Position (in seconds) 0 1/60 1 1/100 2 1/250 3 1/500 4 1/1000 5 1/2000 6 1/40.
Pelco Manual C1441M-D (1/98) 9 4.0 SERVICE Should it become necessary to remove the camera/lens for service or replacement, follow the steps outlined below . Refer to Figure 4, if necessary . 1. Remove main electrical power by switching off main power switch located up inside the back box.
10 Pelco Manual C1441M-D (1/98) 5.0 WIRING DIAGRAM Figure 5. Schematic Diagram for Color Camera/Lens RED GREEN YELLOW BLACK GRAY WHITE BROWN BLUE RED VIOLET YELLOW BLACK GRAY WHITE BROWN BLUE BROWN WH.
Pelco Manual C1441M-D (1/98) 11 6.0 SPECIFICA TIONS MECHANICAL Housing Construction: 0.050" aluminum Dimensions: 6.25" L x 4.25" H x 4.10" W (15.
12 Pelco Manual C1441M-D (1/98) 7.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved.
An important point after buying a device Pelco 10P08 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco 10P08 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco 10P08 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco 10P08 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco 10P08 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco 10P08, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco 10P08.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco 10P08. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco 10P08 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
