Instruction/ maintenance manual of the product 06) 2 C2616M (6 Pelco
Go to page of 12
Hard Disk Drive Replacement Instructions C2616M (6/06).
2 C2616M (6/06) Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Parts and Tools . . . . . . . . . . .
C2616M (6/06) 3 Introduction This manual provides instructions for replacing the primary master or secondary slave hard disk drive in a DX4000 Series DVR (digital video recorder). PARTS AND T OOLS NOTE: This replacement kit includes a Pelco-certified hard disk drive (160 GB or 250 GB).
4 C2616M (6/06) Getting Started 1. Familiarize yourself with the instructions throughout this manual. 2. Check that you have all the necessary parts and tools. Refer to Parts and T ools on page 3. 3. If possible, back up all essential video before you install a new hard disk drive.
C2616M (6/06) 5 Figure 2. ESD Protection A disposable ESD wrist strap (refer to Figure 3) is included with this kit. Attach the copper end of this wrist strap to any unpainted surface of an appliance that is grounded. An appliance is considered grounded if it can direct ESD to the earth usually through its power cable.
6 C2616M (6/06) Preparing the Unit to Install the Drive 1. T urn off power to the DX4000, and then remove the power cord from the unit. 2. Remove the top cover of the DVR (refer to Figure 4). a. Remove all nine screws from the DVR — three screws on each side and three on the top.
C2616M (6/06) 7 Replacing the Hard Disk Install only blank hard disk drives received from the Pelco factory . Do not install a replacement hard disk drive that is already formatted. Hard disk drives that are already formatted can cause errors on the DX4000.
8 C2616M (6/06) 3. V erify that the jumper on the replacement hard disk drive is set correctly as either Master or Slave. The Master hard disk drive requires a jumper; the Slave hard disk drive does not. Figure 7. Jumper Placement on Master Hard Disk Drive 4.
C2616M (6/06) 9 Reassembling the Unit 1. Replace the lid, and use the original screws to secure the lid in place. 2. Reconnect the power cord. 3. Restart the DX4000, and then follow the prompts to format the replacement hard disk drive.
10 C2616M (6/06) After the hard disk drives are formatted, the Login screen appears with the Administrator user ID. Figure 10. Login Screen 3. Enter a password for the administrator , and then press the Enter button.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco 06) 2 C2616M (6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco 06) 2 C2616M (6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco 06) 2 C2616M (6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco 06) 2 C2616M (6 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco 06) 2 C2616M (6 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco 06) 2 C2616M (6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco 06) 2 C2616M (6.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco 06) 2 C2616M (6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco 06) 2 C2616M (6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
