Instruction/ maintenance manual of the product SP 850-S Peerless Industries
Go to page of 10
Max Load Capacity: 150 lb (68 kg) 3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.
2 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07 Note: Read entire instruction sheet before you start inst allation and assembly . For customer care call (800) 729-0307 or (708) 865-8870. • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet.
3 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07 SP8 5 0 SP8 5 0 P SP8 5 0- S SP8 5 0P- S De s cr i pti o n Qty. P a r t # P a r t # P a r t # P a r t # A wall m ount as s em bl y 1 201-038 5 201-03 86 201-0 383 201-0 384 B l oc k ing t ab 1 200-187 1 200-18 71 200-4 871 200-4 871 C .
4 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07 A Inst allation to Wood Stud W all • Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power .
5 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07 Position wall mount assembly ( A ) at desired position on wall . Use wall mount assembly, making sure that it is level, as a template to mark holes. Drill four 1/4" (6 mm) dia. holes to a minimum depth of 2-1/2" (64 mm).
6 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07 INSTALLATION TAB A SLIDING ARM Place installation tab over sliding arms of wall mount assembly ( A ) to lock them in place.
7 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07 FOR VESA 200 MOUNTING PATTERN: Thread two M4 x 12 mm screws ( BB ), leaving .25" exposed thread, into top holes on back of screen. Hook screen onto mounting plate, and attach using two bottom M4 x 12 mm screws as shown in figures 4.
8 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07 fig. 8.1 fig. 8.2 5° tilt 10° tilt M6 SCREW MOUNTING PLA TE M6 SCREW MOUNTING PLA TE Slide one mesh sleeve ( F ) over each cable. Use cable ties ( G ) to tighten both ends of mesh sleeves to cables.
9 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07 Roll can be adjusted 1° clockwise or counterclockwise. T o adjust roll, loosen screen fasteners slightly , leaving them snug. Level screen, then tighten screen fasteners. NOTE: When adjusting roll, screws should be retightened as indicated in step 4.
10 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07 Screen Comp atibility Chart M a n uf a c t u r e r S c r e e n M a nu f a c t u r e r M o d e l Size Apex 27" AVL-2776 Dell 26 " W2600 .
An important point after buying a device Peerless Industries SP 850-S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peerless Industries SP 850-S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peerless Industries SP 850-S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peerless Industries SP 850-S you will learn all the available features of the product, as well as information on its operation. The information that you get Peerless Industries SP 850-S will certainly help you make a decision on the purchase.
If you already are a holder of Peerless Industries SP 850-S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peerless Industries SP 850-S.
However, one of the most important roles played by the user manual is to help in solving problems with Peerless Industries SP 850-S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peerless Industries SP 850-S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
