Instruction/ maintenance manual of the product PVM 38i Peavey
Go to page of 4
PVM’” 38i Unidirectional Dynamic MIcrophone SPECIFICATIONS Element Type: Dynamic (with Hum Compensation Coil) Polar Pattern: Cardlold Impedance: Low (300 ohms +200/o) Frequency Response: 50 to 16,000 H z Sensitivity: Output Power Level -56 dB (0 dB = 1 mW/iO microbar*) Open Circuit Voltage -75.
The PVM’” 38i also features a refined shock suspensron which provides a very low sensitivity to annoying handling and stand noises. Feedback and coloration from nearby monitors or the house system are effec- tively controlled by the very uniform car- dioid directional properties.
5 dB per division 180” Frequency Response 50 Hz 100 H Z 200 Hz 500 Hz 1 kHz PkHz 5 kHz 10 kHz 20 kHz 180” Proximity Effect 50 Hz 100 Hz 200 Hz 500 Hz 1 kHz 2kHz 5 kHz 10 kHz 20 kHz 0” & 180.
PEAVEY ELECTRONICS CORPORATION (“Peavey”) warrants this microphone to the original retail purchaser to be free from defects in material and workmanship for a period of one (1) year from date of purchase; provided, however, that the existence of this limited warranty is subject to the conditions, exclusions and limitations hereinafter set forth.
An important point after buying a device Peavey PVM 38i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peavey PVM 38i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peavey PVM 38i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peavey PVM 38i you will learn all the available features of the product, as well as information on its operation. The information that you get Peavey PVM 38i will certainly help you make a decision on the purchase.
If you already are a holder of Peavey PVM 38i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peavey PVM 38i.
However, one of the most important roles played by the user manual is to help in solving problems with Peavey PVM 38i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peavey PVM 38i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
