Instruction/ maintenance manual of the product PM 1 Peavey
Go to page of 16
PM ONE Pr oduct ion Mix er Oper ating Guide ™.
Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PM ONE ª Professional Stereo Production Mixer Thank you for purchasing the PM One ª stereo production mixer . The unique features of this mixer are sure to add to your performances, both live and recorded. The PM One is a true stereo, fully featured mixer with the DJ in mind.
DESCRIPTIONS POWER The PM One is supplied with a switchable power supply . Before plugging your PM One in, please read this entire section to ensure proper supply voltage selection and unit operation. It is important that all safety precautions be followed.
OUTPUTS The PM One features two different stereo outputs. These outputs are designed for the different types of inputs found on various external equipment. Pay close attention to ensure you have selected the right output for your application. Always use quality , shielded cables and verify a good connection.
8. PHONO INPUT GROUND SCREW Grounds from external turntable(s) should be connected at this point for a proper input connection. 9. MIC 1 INPUT The Mic 1 Input is located on the top of your PM One. (See diagram on back.) The Mic 1 Input is a balanced, low impedance controlled by the Microphone Fader (1 1).
13. CHANNEL F ADER This stereo fader controls the level of each individual channel regardless of input type. Placing the fader in the Ò0Ó position will produce minimum gain or no signal. Moving the fader to the Ò10Ó position will give maximum gain or the highest output.
selected on the right X-Fader Assign). The interim from left to right would produce a combination of both, allowing a smooth transition from one channel to the other . Note: The X-Fader is replaceable by removing the two outside mounting screws on the top of the unit.
CUE This section identifies and describes the Cue features of the PM One. The Cue allows you to preview and stage material prior to playing through the mains (Output-amp). 23. CUE ASSIGN Use this selector to determine which pair of channels you would like to cue at one time.
CD Player Turntable Turntable CS ¨ 800s CD Player Tape Deck Hi Z Mic PVM ¨ 22 Headphones Mini Disc Drum Machine Wireless Mic* CH. A Input CH. B Input L/R Input PM ª One Recommended Hookup for DJÕs *NOTE: Wireless mics are typically mono.
Tape Deck PVM ¨ 22 Headphones Wireless Mic* CH. A Input CH. B Input PM ª One Recommended Hookup for Production Tape Deck CD Player L/R Input Wireless Mic* L/R Input CS ¨ 800s SP ¨ 2GÕs CH. B Output CH. A Output *NOTE: Wireless mics are typically mono.
PM ONE SPECIFICA TIONS Inputs: Microphone: 1m V 47 k Ohm/High impedance Phone: 3m V 47 k Ohm Line/T ape/CD: 150m V 27 k Ohm Output: 1.5 Volt max Frequency response: 20-20,000 Hz ± 3 dB Distortion: ±0.
NOTES: 13.
IMPORT ANT SAFETY INSTRUCTIONS W ARNING: When using electric products, basic cautions should always be followed, including the following: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
PEA VEY ELECTRONICS CORPORA TION LIMITED W ARRANTY Effective Date: July 1, 1998 What This W arranty Covers Y our Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.
Peavey Electronics Corporation ¥ 71 1 A Street ¥ Meridian, MS 39301 (601) 483-5365 ¥ Fax (601) 486-1278 ¥ www .peavey .com ©1999.
An important point after buying a device Peavey PM 1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peavey PM 1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peavey PM 1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peavey PM 1 you will learn all the available features of the product, as well as information on its operation. The information that you get Peavey PM 1 will certainly help you make a decision on the purchase.
If you already are a holder of Peavey PM 1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peavey PM 1.
However, one of the most important roles played by the user manual is to help in solving problems with Peavey PM 1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peavey PM 1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
