Instruction/ maintenance manual of the product MMA 800T Peavey
Go to page of 12
1 Cover for MMA™800T.
2 Intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 1 1 2 3 4 5 6 7 8 91 0 • 9 channel mixing system • Contour switch (special equalization) • 20-20 kHz frequency r esponse • Bass and treble contr ols • Bridging input/output • Plug in mod.
4 HIGH EQ CONTROL (TREBLE) (3): Active equalization control that adjusts the high frequency response. Clockwise rotation boosts highs while counterclockwise rotation provides a cut (reduction) of the high frequencies ( ± 10 dB). MASTER (4): Controls the overall volume level of the system.
5 FUSE (13): W ARNING: THE FUSE SHOULD ONL Y BE REPLACED WHEN THE POWER CORD HAS BEEN DISCONNECTED FROM ITS POWER SOURCE. The fuse is located within the cap of the fuseholder . If the fuse should fail, IT MUST BE REPLACED WITH THE SAME TYPE AND V ALUE IN ORDER T O A VOID DAMAGE T O THE EQUIPMENT AND T O PREVENT VOIDING THE W ARRANTY .
6 SPECIFICA TIONS OUTPUT POWER: +4 dBm (rated output) +17 dBm (maximum) POWER BANDWIDTH: 40 Hz to 20 kHz, +17 dBm, > 0.5% THD FREQUENCY RESPONSE: 20 Hz to 20 kHz ± 1 dB THD: 0.
7 Block Diagram W ARNING! DO NOT A TTEMPT T O INST ALL THIS UNIT WHILE IT OR ANY CONNECTING UNITS ARE POWERED ON. RISK OF ELECTRICAL SHOCK EXISTS IF ALL UNITS ARE NOT POWERED OFF DURING INST ALLA TION. TO PREVENT ELECTRICAL SHOCK OR FIRE HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS- TURE.
8.
9 For further information on other Peavey Ar chitectural Acoustics pr oducts, ask your Authorized Peavey Sound Contractor for the appr opriate Peavey Ar chitectural Acoustics catalog/publication.
10 LIMITED WARRANTY Peavey Electronics Corporation warrants to the original purchaser of this new Architectural Acoustics product that it is free from defects in material and workmanship.
11 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following. 1. Read all safety and operating instructions before using this product. 2. All safety and operating instructions should be retained for future reference.
12 Features and specifications subject to change without notice. Peavey Electronics Corporation 711 A Street / Meridian, MS 39301 / U.S.A. / (601) 483-5365 / Fax 486-1278 ©1995 #80302328 Printed in U.
An important point after buying a device Peavey MMA 800T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peavey MMA 800T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peavey MMA 800T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peavey MMA 800T you will learn all the available features of the product, as well as information on its operation. The information that you get Peavey MMA 800T will certainly help you make a decision on the purchase.
If you already are a holder of Peavey MMA 800T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peavey MMA 800T.
However, one of the most important roles played by the user manual is to help in solving problems with Peavey MMA 800T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peavey MMA 800T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
