Instruction/ maintenance manual of the product IDC 150T II Peavey
Go to page of 8
1 Cover for IDC™ 150T II.
2 Intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 IDC™ 150T II TM ® Congratulations on your purchase of the IDC™ 150T II . The IDC™ 150T II power amplifier is a three rack space, solid state, mono power amplifier capable of delivering more than 150 W RMS. The unit has been designed to be reliable, meeting the needs of most fixed installation applications.
4 BACK P ANEL FEA TURES: FUSE (6) W ARNING: THE FUSE SHOULD ONL Y BE REPLACED WHEN THE POWER CORD HAS BEEN DISCONNECTED FROM ITS POWER SOURCE. CAUTION: USING A FUSE LARGER THAN THE RECOMMENDED SIZE COULD RESUL T IN PERMANENT DAMAGE TO THE AMPLIFIER. The fuse is located within the cap of the fuseholder .
5 INST ALLA TION INFORMA TION: POWER HANDLING AND GROUNDING For your safety , we have incorporated a 3-wire line (mains) cable with proper grounding facilities.
6 Due to our efforts for constant improvements, featur es and specifications listed herein ar e subject to change without notice. SPECIFICA TIONS (all measur ements @ 120 V AC, 60 Hz or 24 V DC) Rated Output Power: (typical value) AC powered, continuous sine wave: 70 volt line 32.
7.
8 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following: 1. Read all safety and operating instructions before using this product. 2. All safety and operating instructions should be retained for future reference.
An important point after buying a device Peavey IDC 150T II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peavey IDC 150T II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peavey IDC 150T II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peavey IDC 150T II you will learn all the available features of the product, as well as information on its operation. The information that you get Peavey IDC 150T II will certainly help you make a decision on the purchase.
If you already are a holder of Peavey IDC 150T II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peavey IDC 150T II.
However, one of the most important roles played by the user manual is to help in solving problems with Peavey IDC 150T II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peavey IDC 150T II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center