Instruction/ maintenance manual of the product I8B+ Peavey
Go to page of 12
www.pe avey . com PV ™ i 8B+ 350- WA TT , 8-CHANNEL MIXER AMPLIFIER Operatin g Manual.
2 Intended to alert the user to the presence of uninsulated “danger ous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 IMPOR T ANT SAFET Y IN STR UCTION S WARN ING: When using electrical products, basic cautions should always be followed, including the following: 1. Read these instructions. 2. K eep these instructions. 3. Heed all warnings. 4. Follo w all instructions.
4 INSTRUC CIONES IMPOR T ANTES P ARA SU SEGURIDAD CUIDADO: Cuando use productos electrónicos, debe tomar precauciones básicas, incluyendo las siguientes: 1. Lea estas instrucciones. 2. Guarde estas instrucciones. 3. Haga caso de todos los consejos. 4.
5 PV ™ i 8B+ 350-W att, 8-Channel Mixer Amplifier The PVi 8B+ powered mixer is easy to use and transport, and is designed with the latest P eavey technology . Constructed with a rugged metal structure, wood cabinet, vinyl surface and protectiv e corners, the PV i 8B+ is the ideal pow ered mixer .
6 F ront Panel R ear P anel.
7 (1) 3-PIN L OW -IMPEDANCE MICROPHONE INPUT This input is for typical balanced, low-impedance microphones. It will automatically provide phantom po wer (15V) for condenser mics or active direct box es. This has an input impedance of 1k ohms. The connector is wir ed as: Pin 1=shield; Pin 2=positive (hot); Pin 3=negative (cold).
8 F ront Panel (17) MONIT OR EQ Th is is t he 7 - ba n d EQ w it h l ev el m et e r . (18) EFFECTS RETURN/MONITOR This controls the level of effects applied to the monitors. (19) MONITOR MIX L EVEL This controls the monitor output level at the Monitor Output Jack (29).
9 (1) SPE AKER OUTPUTS These are four two-conductor 1/4" speaker outputs. Each one is rated at 4 ohms minimum impedance. T otal minimum load for each amplifier channel is 4 ohms, except Bridged which is 8 ohms. Y ou may connect either one 4-ohm (except Bridged), one 8-ohm or two 8-ohm speakers per output jack.
10 Output Power: 350 watts / 4 ohms, music power 220 watts / 8 ohms, music power 250 watts / 4 ohms, continuous 150 watts / 8 ohms, continuous 650 watts / 8 ohms, Bridged Aux S END Output: -10 dBv nom.
1 1 Notes:.
Featur es and specifications subject to change without notice. Peav ey Electronics Corporation • 5022 Har tley Peavey Drive • Meridian, MS • 39305 (601) 483-5365 • F A X (601) 486-1278 • www .
An important point after buying a device Peavey I8B+ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peavey I8B+ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peavey I8B+ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peavey I8B+ you will learn all the available features of the product, as well as information on its operation. The information that you get Peavey I8B+ will certainly help you make a decision on the purchase.
If you already are a holder of Peavey I8B+, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peavey I8B+.
However, one of the most important roles played by the user manual is to help in solving problems with Peavey I8B+. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peavey I8B+ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
