Instruction/ maintenance manual of the product 400 Peavey
Go to page of 6
AIASHVillETM 400 f WARNING: TO PREVENT ELECTRICAL SHOCK OR FIRE HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. BEFORE USING THIS APPLIANCE, READ THE OPERATING GUIDE FOR FURTHER WARNINGS.
NASHVILLE’” 400 GENERAL DESCRIPTION Congratulations, you have just purchased the successor of the famous LTD@ 400. The new Nashville’” 400 is a refinement of the capabilities and features of the older LTD@ 400 and has far surpassed that unit in performance.
EQUALIZATION LOW EQ CONTROL (8) The Low EQ Control is of the active”shelving type”and provides lowfreqency boost in the clockwise positions and low frequency cut in the counterclockwise positions. Flat response is obtained in the vertical 12:00 o’clock position, as indicated by the zero in the center of the rotation.
PILOT LED (12) This light emitting diode (LED) indicates when the amp is switched on and actually drawing from the line (mains) connection. It is totally solid-state and not subject to burnouts, as are incandescent types.
NASHVILLE’” 400 SPECS POWER AMPLIFIER SECTION: RATED POWER & LOAD: 210 W RMS into 4 ohms with DDTgcompression and LED indicator POWER @ CLIPPING: (TYPICALLY) (5% THD, 1 KHz, 120 VAC line) 130 .
b Shop the defectrve item, prepard, to: OR PEAVEY ELECTRONICS CORPORATION international Service Center Highway 80 East MERIDIAN. MS 39301 including therewith a complete, detailed descnption of the problem, together with a legible copy of the original PROOF OF PURCHASE and a complete return address.
An important point after buying a device Peavey 400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peavey 400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peavey 400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peavey 400 you will learn all the available features of the product, as well as information on its operation. The information that you get Peavey 400 will certainly help you make a decision on the purchase.
If you already are a holder of Peavey 400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peavey 400.
However, one of the most important roles played by the user manual is to help in solving problems with Peavey 400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peavey 400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
