Instruction/ maintenance manual of the product 2155 Patton electronics
Go to page of 20
USER MANUAL MODEL 2155 CopperLink Ethernet Extender SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M2155 Doc# 032111U Rev . A Re vised 2/12/03 An ISO-9001Cer tified Company.
2 CONTENTS 1.0 Warranty Information ................................................................. 3 1.1 Radio and TV Interference ............................................................ 3 1.2 CE Notice ........................................
3 1.0 W ARRANTY INFORMATION P atton Electronics warr ants all Model 2155 components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the shipment.
4 1.3 SERVICE All warr anty and non-warranty repairs m ust be retur ned freight prepaid and insured to P atton Electronics. All returns must hav e a Retur n Materi- als A uthorization number on the outside of the shipping container . This number ma y be obtained from P atton Electronics T echnical Ser vices at: • T el.
5 2.0 GENERAL INFORMATION Thank you purchasing this P atton Electronics product. This product has been thoroughly inspected and tested and is warr anted f or one year f or par ts and labor . If questions arise while installing or using this product, contact CopperLink T echnical Support at +1 (301) 975-1007 .
6 Figure 1. T ypical application The 2155/L and 2155/R work together to create a transparent e xtension between two peered Ethernet LANs. Figure 1 shows a typical point-to- point application.
7 3.0 INSTALLATION Because the CopperLink Ether net Extender requires no configuration, it can be installed quickly . Installation consists of the f ollo wing: • Connect the line interf ace between the units (ref er to section 3.
8 1. T o function properly , two Ethernet Extenders must be connected together using twisted-pair , unconditioned, dr y , metal wire, between 19 (0.9mm) and 26 A WG (0.4mm). Leased circuits that run through signal equalization equipment are not acceptable .
9 cable . Figure 5 shows how to construct a cable to connect the 10Base-T interf ace to a 10Base-T Hub . Figure 5. Connecting the 10Base-T interf ace to a 10Base-T Hub 3.4 CONNECTING POWER An e xter nal A C or DC power supply is a vailab le separately .
10 External 48 VDC power suppl y • Input – Rated voltage: 36–60 VDC – Rated current: 0.25 A DC at nominal 48 VDC – 3-pin locking connector , 3.
11 4.0 OPERATION Once the CopperLink Ether net Extenders are properly installed, they should operate transparently . No user settings required. This section describes reading the LED status monitors.
12 T able 1: LED status monitor indications LED Description DSL Link (Activ e Green) Solid green (On) indicates that the end to end DSL F ramer Link is up , signifying that the link across the DSL span is activ e. The DSL Link LED is Off when the link is down.
13 4.2 T EST MODES The Model 2155 has a built-in proprietar y loopbac k test mode, plus a built-in V .52 BER test patter n generator , f or ev aluating the communica- tion link. These tests can be activ ated from the front panel of the Model 2155 Ether net Extenders .
14 APPENDIX A SPECIFICATIONS A.1 GENERAL CHARACTERISTICS • Compact low cost plug-and-pla y router • 10Base-T Ether net • Unlimited host suppor t • Six front panel LEDs indicate DSL & 10BT .
15 A.7 CONNECTORS RJ-45 on line side; shielded RJ-45 on Ether net por t A.8 POWER SUPPLY Exter nal 100–240 V A C , 50–60 Hz (univ ersal input option), +5 VDC out- put; 48 VDC (optional), 5 watts , +5 VDC output A.9 T EMPERATUR E RANGE 32–122°F (0–50°C) A.
16 APPENDIX B MODELS 2155 F ACTOR Y REPLACEMENT P AR TS AND ACCESSOR IES *Only required with optional UI power supply (08055DCUI) P atton Model # Description 2155 Base Models 2155/L CopperLink Ether n.
17 APPENDIX C MODELS 2155 INTERF ACE PIN ASSIGNMENT C.1 10BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection C.
18 Notes ________________________________________________________ ________________________________________________________ ________________________________________________________ ____________________.
19 Notes ________________________________________________________ ________________________________________________________ ________________________________________________________ ____________________.
20 Notes ________________________________________________________ ________________________________________________________ ________________________________________________________ ____________________.
An important point after buying a device Patton electronics 2155 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronics 2155 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronics 2155 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronics 2155 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronics 2155 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronics 2155, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronics 2155.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronics 2155. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronics 2155 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
