Instruction/ maintenance manual of the product IM1/I Patton electronic
Go to page of 8
USER MANU A L MODEL IM 1/I Ethernet Bridge Module SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07MIM1I-D Doc# 090101UD Revised 7/29/99 An ISO-9001 Certifie.
2 1.3 SERVICE All warranty and nonwarranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container . This number may be obtained from Patton Electronics T echnical Service at: (301) 975-1007, http://www .
2.3 TYPICAL APPLICA TION The Model IM1/I QuickConnect™ is designed to plug directly into the rear of a Patton Electronics baseband modem (i.e. Model 1090 or 1092). The Model IM1/I is designed to be used as one of a pair of units. Figure 1 (below) illustrates a typical Model IM1/I installation.
3 3 . . 0 0 C C O O N N F F I I G G U U R R A A T T I I O O N N The Model IM1/I module plugs into Patton’s fiber and copper baseband modems to provide Ethernet LAN extension.
3.1.2 Installing the New QuickConnect™ Module 1) Make sure the power switch on the base unit is off. Leave the power cord plugged into a grounded outlet to keep the unit grounded. 2) Hold the module with the faceplate toward you and align the module with the guide slots in the rear panel of the base unit.
4.3 CONNECTION TO THE LINE INTERF ACE MEDIA Instructions for connecting the line interface media (twisted pair , or fiber optic cable) are contained within the base unit user manual.
5.3 LED ST A TUS MONITORS The Model IM1/I features two LEDs that monitor general operating status and the 10Base-T twisted pair link integrity . Figure 4 (below) shows the LEDs located directly beneath the RJ-45 jack. Following Figure 4 is a description of each LEDs function.
A A P P P P E E N N D D I I X X B B IM1/I INTERF ACE PIN ASSIGNMENT 10BASE-T Interface Pin Description (RJ-45 Female Connector) (DTE Configuration) Pin # Signal 1 TD + (data output from IM1/I) 2 TD - .
An important point after buying a device Patton electronic IM1/I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic IM1/I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic IM1/I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic IM1/I you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic IM1/I will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic IM1/I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic IM1/I.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic IM1/I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic IM1/I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
