Instruction/ maintenance manual of the product 584 Patton electronic
Go to page of 8
USER MANU A L MODEL 574, 576, 578, 584, 586, 588 Standalone Hub 100Base-T (CA T-5) Surge Protectors SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .
2 2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant- ed for One Y ear parts and labor . If any questions or problems arise during installation or use of this product, please contact Patton Electronics Customer Service at (301) 975-1007.
3.0 INST ALLA TION Model’s 57x and 58x surge protectors are easy to install and are designed to operate transparently to your network. This section describes cohnnection procedures for both models.
3.2 INST ALLA TION PROCEDURES In order to operate as designed, the Model 57x and 58x must be connected correctly to your Cat-5 network. For the safest installation, please read all the instructions below and follow them very carefully . 3.2.1 Connecting the Model 57x or 58x to an I/O Port 1.
APPENDIX B INTERNA TIONAL ELECTROTECHNICAL COMMISSION (IEC) COM- PLIANCE Meets IEC standards 801.2, 801.4 and 801.5 (CE Mark) Effective January 1996 the European Economic Community will require that all electronic devices be tested and comply with all appli- cable International standards relating to the product type and category of use.
APPENDIX C (contin ued) TSB-40A COMPLIANCE TESTING RESUL TS TYPICAL A TTENUA TION MEASUREMENT APPENDIX C EIA/TIA TSB-40A COMPLIANCE The Model 57x/58x series surge protectors have been designed to conform to stringent EIA/TIA TSB-40 standards as required for all Category-5 connecting hardware.
Appendix C (continued) TSB-40A Compliance T esting Results TYPICAL INSERTION LOSS MEASUREMENT APPENDIX C (contin ued) TSB-40A COMPLIANCE TESTING RESUL TS TYPICAL RETURN LOSS MEASUREMENT 11 Figure C-5. Return Loss Measurements for Patton Model 57x Figure C-6.
13 Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you find this user manual helpful.
An important point after buying a device Patton electronic 584 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 584 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 584 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 584 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 584 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 584, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 584.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 584. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 584 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
