Instruction/ maintenance manual of the product 3201 Patton electronic
Go to page of 12
DiamondLink™ Model 3201 & 3241 G.SHDSL Router Quick Star t Guide Important —This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment.
2 DiamondLink 3201 & 3241 Quick Start Guide 1.0 Power up the router Y our G.SHDSL router comes with one of the following power supply options: • External AC adaptor with included power cord • External DC power supply 1.1 Models with external AC adaptor 1.
DiamondLink 3201 & 3241 Quick Start Guide 3 Figure 1. 48VDC power supply 1.2 Models with external DC power supply 1. Strip insulation 1/4-inch from the electrical wires that will connect the DC power source to the 48VDC power supply terminal block (see figure 1 ).
4 DiamondLink 3201 & 3241 Quick Start Guide 2.1 Connect a PC and log in 1. Using the included combination RS232/Ethernet cable and DB9-RJ45 adapter , connect a PC’ s serial port to the on the DiamondLink’ s (red) Console port (see figure 2 ).
DiamondLink 3201 & 3241 Quick Start Guide 5 3.0 Connect to the local IP network Now you can connect the DiamondLink to your local IP network and complete the remaining configuration from your PC using a standard web browser . Connect the DiamondLink’ s (green) Ethernet port to the same Ethernet segment as your PC (see figure 3 ).
6 DiamondLink 3201 & 3241 Quick Start Guide 5.0 Connect the G.SHDSL por t 1. Obtain single-twisted-pair cable with an RJ-11 plug connector at each end. 2. Plug one end of the cable into the RJ-11socket (yellow colored port labeled LINE ) on the DiamondLink Router .
DiamondLink 3201 & 3241 Quick Start Guide 7 B.0 Compliance Information B.1 Compliance EMC: • FCC Part 15, Class A • EN55022, Class A • EN55024 Safety: • UL 60950-1/CSA C22.2 N0. 60950-1 • IEC/EN60950-1 • AS/NZS 60950-1 PSTN Regulatory: • FCC Part 68 • CS-03 • AS/ACIF S043:2003 B.
8 DiamondLink 3201 & 3241 Quick Start Guide 2.3 Industry Canada Notice This equipment meets the applicable Industry Canada T erminal Equipment T echnical Specifications.
DiamondLink 3201 & 3241 Quick Start Guide 9 B.6 Authorized European Representative D R M Green European Compliance Services Limited. Avalon House, Marcham Road Abingdon, Oxon OX14 1UD, UK.
10 DiamondLink 3201 & 3241 Quick Start Guide Copyright statement Copyright © 2008, Patton Electronics Company . All rights reser ved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.
DiamondLink 3201 & 3241 Quick Start Guide 11.
12 DiamondLink 3201 & 3241 Quick Start Guide.
An important point after buying a device Patton electronic 3201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 3201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 3201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 3201 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 3201 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 3201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 3201.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 3201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 3201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
