Instruction/ maintenance manual of the product 3008/I Patton electronic
Go to page of 12
RocketLink™-G Model 3088/I G.SHDSL NTU Quick Star t Guide Important —This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment. Document Number: 03332U7-001 Rev .
2 Model 3088/I Quick Start Guide 1.0 Power up the NTU Y our NTU comes with an external AC adaptor with detachable power cord. 1.1 AC power-up 1. Connect female plug of the AC power cord to the AC adaptor provided. 2. Connect the barrel-type connector of the AC adaptor to the barrel-type power jack on the RocketLink-G NTU.
Model 3088/I Quick Start Guide 3 Figure 1. DC Power Supply 1.3 Power-up indication The Power and 100M Ethernet LEDs are lit while the RocketLink-G is powering up. 2.0 Configure the IP address The RocketLink-G NTU is shipped with a factory-configured IP address assigned to the Ethernet LAN port (green outline).
4 Model 3088/I Quick Start Guide 2. Start a HyperT erminal session on the PC using the settings: 9600 bps, 8 data bits, no parity , 1 stop bit, no flow control 3. Log in to the RocketLink-G NTU using the factory-default login ( superuser ) and password ( superuser ): Login: superuser Password: ********* Login successful 2.
Model 3088/I Quick Start Guide 5 3.0 Connect to the local IP network Now you can connect the RocketLink-G NTU to your local IP network and complete the remaining configuration from your PC using a standard web browser . Connect the RocketLink-G NTU’ s Ethernet port (green) to the same Ethernet segment as your PC (see figure 3 ).
6 Model 3088/I Quick Start Guide 4.0 Log onto the web management interface Y ou will now access the web management graphical user interface (GUI) to configure the RocketLink-G using a standard web browser (such as Netscape browser or Internet Explorer).
Model 3088/I Quick Start Guide 7 5.0 Connect the G.SHDSL Por t 1. Obtain single-twisted-pair cable with an RJ-11 plug connector at each end. 2. Plug one end of the cable into the (yellow) RJ-11 socket (labelled Line) on the RocketLink-G NTU. 3. Plug the other end of the cable into the RJ-11 wall socket that provides your G.
8 Model 3088/I Quick Start Guide B.0 Compliance Information B.1 Compliance EMC: • FCC Part 15, Class A • EN55022, Class A • EN55024 Safety: • UL 60950-1/CSA C22.2 N0. 60950-1 • IEC/EN60950-1 • AS/NZS 60950-1 PSTN Regulatory: • FCC Part 68 • CS-03 • AS/ACIF S043:2003 B.
Model 3088/I Quick Start Guide 9 2.3 Industry Canada Notice This equipment meets the applicable Industry Canada T erminal Equipment T echnical Specifications.
10 Model 3088/I Quick Start Guide B.6 Authorized European Representative D R M Green European Compliance Services Limited. Avalon House, Marcham Road Abingdon, Oxon OX14 1UD, UK.
Model 3088/I Quick Start Guide 11 Copyright statement Copyright © 2008, Patton Electronics Company . All rights reser ved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.
12 Model 3088/I Quick Start Guide.
An important point after buying a device Patton electronic 3008/I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 3008/I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 3008/I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 3008/I you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 3008/I will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 3008/I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 3008/I.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 3008/I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 3008/I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
