Instruction/ maintenance manual of the product 2603 Patton electronic
Go to page of 8
IPLink™ Model 2603 & 2620 W AN Access Router Quick Star t Guide Document Number: 03323U7-001 Rev . B Part Number: 07M2620-QS Revised: October 4, 2005 Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.com WWW: www .
2 IPLink 2603 & 2620 Quick Start Guide 1.0 Power up the router Y our router comes with one of the following power supply options: • External AC adaptor with included power cord • Internal AC power supply • Internal DC power supply—no power accessories are included 1.
IPLink 2603 & 2620 Quick Start Guide 3 1.3 Models with internal DC power supply 1. Strip insulation 1/4-inch from the electrical wires that will connect the DC power source to the IPLink. 2. Connect the ground terminal from the power source to the ground terminal on the IPLink.
4 IPLink 2603 & 2620 Quick Start Guide 2.2 Modifying the IP address 1. Display current IP interface settings for the IPLink Ethernet LAN port. → → → → ip list interfaces <enter> IP Interfaces: ID | Name | IP Address | DHCP | Transport ---|------|----------------|----------|-------------- 1 | ip1 | 192.
IPLink 2603 & 2620 Quick Start Guide 5 Y ou can check the network connection with the ping command. For example, you would ping 10.10.10.5 from your PC.
6 IPLink 2603 & 2620 Quick Start Guide Connecting to the RJ-48C W AN port 1. Obtain a twisted-pair cable with an RJ-48C plug connector at each end. 2. Plug one end of the cable into the RJ-48C socket (labeled WAN ) on the IPLink Router . 3. Plug the other end of the cable into the T1/E1 device.
IPLink 2603 & 2620 Quick Start Guide 7 B.0 Compliance Information B.1 Radio and TV Interference (FCC Part 15) This equipment generates and uses radio frequency energy , and if not installed and used properly—that is, in strict accordance with the manufacturer's instructions—may cause interference to radio and television recep- tion.
8 IPLink 2603 & 2620 Quick Start Guide Connection to party line service is subject to state tariffs. Contact the state public utility commission, public ser- vice commission or corporation commission for information. B.4 Industry Canada Notice This equipment meets the applicable Industry Canada T erminal Equipment T echnical Specifications.
An important point after buying a device Patton electronic 2603 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 2603 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 2603 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 2603 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 2603 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 2603, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 2603.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 2603. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 2603 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
