Instruction/ maintenance manual of the product 2135 Patton electronic
Go to page of 10
USER MANUAL Model 2135 Ethernet Micro-Bridge SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M2135-UM Doc# 08303U2-001, Rev .
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 2135 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
3 2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant- ed for One Y ear parts and labor .
ated Cisco configuration will set serial interface (s0) to accommodate half bridging for the above example. Authentication is optional under PPP . In a point-to-point leased- line link, incoming customer facilities are usually fixed in nature, there- fore authentication is generally not required.
7 2135 10BaseT DTE RJ-45 Pin No. RJ-45 Pin No. 1 (TX+) 1 (TX+) 2 (TX-) 2 (TX-) 3 (RX+) 3 (RX+) 6 (RX-) 6 (RX-) 4.2 CONNECT TO THE DTE INTERF ACE The DTE interface is a V .35 DTE (M/34 male connector), designed to plug directly into a DCE interface (See Appendix C V .
5.1.2 LED Descriptions The status LED blinks yellow from one to eleven times to indicate system status. Each pulse pattern is separated by a 2 second "off " peri- od. Greater pulse patterns have higher priority (buffer saturation has greater priority than an empty MAC table).
11 APPENDIX A P A TTON ELECTRONICS MODEL 2135 SPECIFICA TIONS LAN Connection: RJ-45, 10BaseT , 802.3 Ethernet sup- ported by T ransparent LAN bridging DTE connection: M34 connector , V .
13 APPENDIX C 10BaseT Interface Pin Assignment (RJ-45 Female Connector) (DTE Configuration) Pin # Signal 1 TD + (data output from 2135) 2 TD - (data output from 2135) 3 RD + (data input to 2135) 4 no .
15 APPENDIX E POWER SUPPL Y INTERF ACE Via 5VDC power jack (J1) Center Pin: +5VDC @ 500 mA minimun Outer Barrel: Ground APPENDIX D T erminal Interface Pin Assignment (M/34 Male Connector) Pin # Signal.
17 18 Notes __________________________________________ __________________________________________ __________________________________________ __________________________________________ ________________.
An important point after buying a device Patton electronic 2135 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 2135 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 2135 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 2135 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 2135 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 2135, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 2135.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 2135. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 2135 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
