Instruction/ maintenance manual of the product 2036 Patton electronic
Go to page of 8
USER MANU AL SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part #07M2036-C Doc #102061UC Revised 08/17/99 MODEL 2036 and 2037 Parallel to Serial/ Serial to Parall.
1.0 WARRANTY INFORMA TION Patton Electronics warrants all Model 2036 and 2037 components to be free from defects, and will—at our option—repair or replace the products should they fail within one year from the first date of shipment.
3.0 CONFIGURA TION The Model 2036 and 2037 are simple to install and designed for excellent reliability . The following instructions will help you set up and install your converter properly . If you have any questions, please call Patton T echnical Support at (301) 975-1007.
Switch 3 through 5: Data, Parity and Stop Bit Switches 3 through 5 are used to specify the data, parity and stop bits. The following table shows the settings that may be used: Switches 6 through 8: Frequency and Data Rate Switches 6 through 8 determine the frequency and data rate.
5.0 OPERA TION Once your interface converter is properly configured and installed, it should operate transparently—as if it were a standard cable connection. Operating power is derived from the RS-232 data and control signals; there is no “ON/OFF” switch.
APPENDIX A P A TTON MODEL 2036 AND 2037 SPECIFICA TIONS Interface: Asynchronous., RS-232C compatible Connectors: (Model 2036) Serial: DB-25 male or female; Parallel: Centronics 36 pin male (Model 2037.
APPENDIX B (continued) SIGNAL DIRECTIONS APPENDIX D P A TTON MODEL 2036 BLOCK DIAGRAM 12 Converter Function Serial Port Connected Serial Data Flow Serial Software Flow Ctrl.
APPENDIX D P A TTON MODEL 2037 BLOCK DIAGRAM 13.
An important point after buying a device Patton electronic 2036 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 2036 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 2036 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 2036 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 2036 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 2036, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 2036.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 2036. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 2036 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
