Instruction/ maintenance manual of the product 1195/4E1 Patton electronic
Go to page of 12
Optical Multiplexer Quick Star t Guide Part Number: 07M1195-QS, Rev . A Revised: Februar y 12, 2009 Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.
2 Model 1195/4E1 Quick Start Guide • This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. • Mains V oltage: Line voltages are present when the power cord is con- nected.
Model 1195/4E1 Quick Start Guide 3 1.0 Connecting power AC Mains version: Please use the AC main cable (provided) to connect the system to your AC mains power outlet. DC Mains version : Please connect the DC mains cable (provided) to the system. The polarity should not be reversed while connecting.
4 Model 1195/4E1 Quick Start Guide 1.3 Grounding When the equipment is used with the AC~220V power supply , the 3-core socket must be grounded for protec- tion.The other equipment, e.g. optical terminal, connected with this equipment must also be grounded T o connect the Earth: 2.
Model 1195/4E1 Quick Start Guide 5 3.0 Connecting the DB-37 connector DC 48 V E1 4-1 II ~ 220 V PGND GND -48V OPTICAL B TX RX OPTICAL A TX RX RS232 CONSOLE DB-37 (Female) Connector 4xE1 Signals 1 18 1.
6 Model 1195/4E1 Quick Start Guide 4.0 Connecting E1 Links Connect E1 line after ensuring that transmission device have been grounded. A Bit Error Rate (BER) test may be conducted on E1 Link using a BERT tester to ensure that the E1 errors are within the permitted limits / threshold.
Model 1195/4E1 Quick Start Guide 7 6.0 Connecting the RS-232 por t Note An RS-232 COM port cable is provided with the 1195/4E1 system. 6.1 RS-232 port cable details End 1 End 2 T ype of cable T wisted.
8 Model 1195/4E1 Quick Start Guide 6.2 RS-232 pin definition DB-9 Pin Number Definition RS-232 2 RS-232 input signal for management 3 RS-232 output signal for management 5 GND Ot h e r s NC.
Model 1195/4E1 Quick Start Guide 9 7.0 Configuring HyperT erminal 1. Click on the Start button from the task bar on your PC. 2. Select Programs > Accesories > Communications > HyperT erminal. The following screen will display: 3. Enter a name for the new connection and click OK.
10 Model 1195/4E1 Quick Start Guide 5. Change the Bits per second option to 19200 and change the flow control option to None. The COM Properties settings should be: 6. Click Apply , then click OK. 7. A new HyperT erminal session screen will display .
Model 1195/4E1 Quick Start Guide 11 8.0 Additional Information Refer to the Model 1195/4E1 Getting Sta r ted Guide located on the CD-ROM shipped with your device . For detailed information about: • Installing, configuring, operating, and troubleshooting A.
12 Model 1195/4E1 Quick Start Guide Copyright statement Copyright © 2009, Patton Electronics Company . All rights reserved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.
An important point after buying a device Patton electronic 1195/4E1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1195/4E1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1195/4E1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1195/4E1 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1195/4E1 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1195/4E1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1195/4E1.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1195/4E1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1195/4E1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
