Instruction/ maintenance manual of the product 1060rc Patton electronic
Go to page of 28
USER MANUAL MODEL 1060RC AC Powered, Asynchronous Short Range Modem: Rack Mount Card SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1060RC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1060RC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
3.0 CONFIGURA TION This section describes the location and orientation of the Model 1060RC's configuration switches and provides detailed instructions on setting each of the switches. 3.1 FRONT CARD CONFIGURA TION The Model 1060RC uses a set of eight DIP switches that allow configuration to a wide range of asynchronous applications.
3.0 CONFIGURA TION This section describes the location and orientation of the Model 1060RC's configuration switches and provides detailed instructions on setting each of the switches. 3.1 FRONT CARD CONFIGURA TION The Model 1060RC uses a set of eight DIP switches that allow configuration to a wide range of asynchronous applications.
Control Input (C in ): The Control Input signal is used by the local Model 1060RC as an input signal to “turn on” (in the “Enabled” settings) and allow data transmission to the remote device. This is required for half-duplex/ switched-carrier environments as well as in hardware flow control applications.
Control Input (C in ): The Control Input signal is used by the local Model 1060RC as an input signal to “turn on” (in the “Enabled” settings) and allow data transmission to the remote device. This is required for half-duplex/ switched-carrier environments as well as in hardware flow control applications.
3.4 REAR CARD CONFIGURA TION The 1060RC has four interface card options: DB-25/RJ-1 1, DB-25/RJ-45, RJ-45/RJ-1 1 and dual RJ-45. Each of these options supports one RS-232 connection and one 4-wire connection (the RS- 232 port is always the lower port on the interface card).
3.4 REAR CARD CONFIGURA TION The 1060RC has four interface card options: DB-25/RJ-1 1, DB-25/RJ-45, RJ-45/RJ-1 1 and dual RJ-45. Each of these options supports one RS-232 connection and one 4-wire connection (the RS- 232 port is always the lower port on the interface card).
The table below provides an overview of strap functions for the DB- 25/modular cards. Following this overview is a detailed description of each strap's function.
The table below provides an overview of strap functions for the DB- 25/modular cards. Following this overview is a detailed description of each strap's function.
SGND & FRGND (JB5) This strap pertains to the DTE interface, which is a 10-position modular RJ-45 jack. In the connected (closed) position, this strap links modular pin 5 (Signal Ground) and frame ground. In the open (disconnected) position, pin 5 is "lifted" from frame ground.
SGND & FRGND (JB5) This strap pertains to the DTE interface, which is a 10-position modular RJ-45 jack. In the connected (closed) position, this strap links modular pin 5 (Signal Ground) and frame ground. In the open (disconnected) position, pin 5 is "lifted" from frame ground.
Switching the Power Supply On and Off The power supply on/off switch is located on the front panel. When plugged in and switched on, a red front panel LED will glow . Since the Model 1000R16 is a "hot swappable" rack, it is not necessary for any cards to be installed before switching on the power supply .
Switching the Power Supply On and Off The power supply on/off switch is located on the front panel. When plugged in and switched on, a red front panel LED will glow . Since the Model 1000R16 is a "hot swappable" rack, it is not necessary for any cards to be installed before switching on the power supply .
RJ-45 SIGNAL PIN# COLOR COLOR PIN# SIGNAL GND 2 Orange .............Brown 7 GND RCV - 3 Black ................Green 5 XMT - XMT+ 4 Red ..................Y ellow 6 RCV+ XMT - 5 Green ...............Black 3 RCV - RCV+ 6 Y ellow ..............Red 4 XMT+ GND 7 Brown .
RJ-45 SIGNAL PIN# COLOR COLOR PIN# SIGNAL GND 2 Orange .............Brown 7 GND RCV - 3 Black ................Green 5 XMT - XMT+ 4 Red ..................Y ellow 6 RCV+ XMT - 5 Green ...............Black 3 RCV - RCV+ 6 Y ellow ..............Red 4 XMT+ GND 7 Brown .
5.2 POWER-UP There is no power switch on the Model 1060RC: Power is automatically applied to the 1060RC when its card-edge connector makes contact with the chassis' mid-plane socket, or when the chassis' power supply is turned on.
5.2 POWER-UP There is no power switch on the Model 1060RC: Power is automatically applied to the 1060RC when its card-edge connector makes contact with the chassis' mid-plane socket, or when the chassis' power supply is turned on.
APPENDIX A SPECIFICA TIONS T ransmission Format: Asynchronous External Interface: RS-232C/CCITT V .24 connection via DB-25 female; EIA/TIA-561 connection via RJ-45 (10 wire); twisted pair connection v.
APPENDIX A SPECIFICA TIONS T ransmission Format: Asynchronous External Interface: RS-232C/CCITT V .24 connection via DB-25 female; EIA/TIA-561 connection via RJ-45 (10 wire); twisted pair connection v.
APPENDIX C F ACTOR Y REPLACEMENT P ARTS The Patton Model 1060RC rack system features interchangeable rear half cards, power cords/fuses for international various operating environments and other user-replaceable parts. Model numbers and descriptions for these parts are listed below: Patton Model # Description 1000RPEM .
APPENDIX C F ACTOR Y REPLACEMENT P ARTS The Patton Model 1060RC rack system features interchangeable rear half cards, power cords/fuses for international various operating environments and other user-replaceable parts. Model numbers and descriptions for these parts are listed below: Patton Model # Description 1000RPEM .
APPENDIX E BLOCK DIAGRAM Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you find this user manual helpful.
.
.
.
APPENDIX E BLOCK DIAGRAM Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you find this user manual helpful.
An important point after buying a device Patton electronic 1060rc (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1060rc yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1060rc - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1060rc you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1060rc will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1060rc, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1060rc.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1060rc. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1060rc along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
