Instruction/ maintenance manual of the product 1058 Patton electronic
Go to page of 20
USER MANUAL MODEL 1058 VLINK Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M1058-B Doc# 058091UB Revised 6/10/02 An ISO-9001Cer tified Company.
2 1.0 Warranty Information ................................................................. 3 1.1 Radio and TV Interference ............................................................ 3 1.2 CE Notice .................................................
3 1.0 W ARRANTY INFORMATION P atton Electronics warrants all Model 1058 components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the shipment.
4 1.3 FCC PART 68 (1058DV ONLY) This equipment complies with P art 68 of the FCC Rules. Please note the f ollowing: 1. Y ou are required to request service from the telephone company bef ore you connect the Model 1058D V to a network. When you request ser vice, y ou must pro vide the telephone company with the f ollowing data.
5 3. If your Model 1058D V causes harm to the telephone network, the telephone company ma y temporarily discontinue y our service. If possible , they will notify y ou in adv ance , but if adv ance notice is not practical, y ou will be notified as soon as possible and will be inf ormed of your right to file a complaint with the FCC.
6 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one year f or par ts and labor . If any questions or prob lems arise during installation or use of this product, contact P atton Electronics T echnical Suppor t at +1 (301) 975-1007.
7 automatically add and delete MA C addresses , only passing pac k ets across the VDSL link that are meant for the remote peered LAN. Figure 1. T ypical application The 1058D V/CO and 1058D V/CP work together to create a transparent e xtension betw een tw o peered Ethernet LANs.
8 3.0 INSTALLATION Because the Model 1058 requires no configuration, it can be installed quickly . If you are installing a standalone unit, ref er to section 3.1 “Standal- one unit installation”. Otherwise, ref er to section 3.2 “Rac k card installation”.
9 2. Secure the rear card using the supplied metal screws . 3. Slide the front card into the chassis until you f eel resistance as the front card engages the rear card. When that happens , gently push the front card f orw ard until it is fully seated in the card-edge recepta- cle of the rear card (it should click into place).
10 3.3 CONNECTING THE T WISTED-PAIR LINE INTERFACE The Model 1058 suppor ts communication between two peer Ethernet LAN sites ov er a distance of up to 4,652 ft (1,418 m) ov er 24 AWG (0.5 mm) twisted-pair wire. Note Actual distance and link performance ma y vary depending on the environment and type/gauge of wire used.
11 Figure 5. Model 1058D (T er minal Block) twisted pair line interface . 3.4 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE The shielded RJ-45 por t labeled Ethernet is the 10/100Base-T interf ace . This por t is designed to connect directly to a 10/100Base-T network.
12 straight-through RJ-45 cab le. Figure 7 diagrams the cab le wiring for con- necting the Model 1058 to a 10/100Base-T hub . Figure 7. Wiring diagram for connecting the Model 1058 to a 10/100Base-T hub Connecting the 10/100Base-T Ethernet P ort to a PC (DTE) The Model 1058 10/100Base-T interf ace is configured as DTE (Data T er- minal Equipment).
13 work. The RJ-45 connector in the model 1058’ s PO TS/ISDN interface is wired as shown in Figure 9. Figure 9. Model 1058D V (RJ-45) POTS/ISDN interf ace 3.6 CONNECTING POWER An e xternal AC or DC pow er supply is av ailab le separately . This connec- tion is made via the barrel jack on the rear panel of the Model 1058.
14 4.0 OPERATION Once the Model 1058s are properly installed, they should operate trans- parently . No user settings required. This section describes reading the LED status monitors. 4.1 POWER UP Bef ore applying power to the Model 1058, please re view section 3.
15 Figure 11. Model 1058 rack card front panel T able 1: F ront panel LED description LED Description P ower Solid GREEN to indicate the unit is powered on. VLINK Link (Active Green) Solid g reen (ON) to indicate that the end-to-end VDSL link between the Model 1058s is established.
16 APPENDIX A SPECIFICATIONS A.1 LAN CONNECTION • Shielded RJ-45, 10/100Base-T , IEEE 802.3 Ethernet • VDSL Connection: RJ-45 and T er minal Block A.2 T RANSMISSION LINE T wo-wire unconditioned twisted pair. A.3 VDSL LINE RATE 12.5 Mbps, symmetric upstream/downstream.
17 APPENDIX B MODEL 1058 SERIES F ACTOR Y REPLACEMENT P AR TS AND ACCESSORIES *Only required with optional UI power supply (08055DCUI) P atton Model # Description Base Models 1058DRC/CO CO VDSL Rack C.
18.
19 APPENDIX C MODEL 1058 SERIES INTERF ACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection C.2 VDSL INTERFACE RJ-45 • Pin 4: RING • Pin 5: TIP • Pins 1, 2, 3, 6, 7, 8: no connection T erminal Block See Figure 5 on page 11.
20 Cop yright © 2001, 2002 P atton Electronics Company All Rights Reser ved..
An important point after buying a device Patton electronic 1058 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1058 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1058 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1058 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1058 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1058, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1058.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1058. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1058 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
