Instruction/ maintenance manual of the product 1000RP Patton electronic
Go to page of 7
USER MANUAL Model 1000RP Series AC and DC Rac k Mount P ower Supplies SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M1000RP-B Doc# 078011UB Re vised 3/19/96.
1.0 W ARRANTY INFORMA TION P atton Electronics warr ants all Model 1000RP Ser ies components to be free from def ects, and will—at our option—repair or replace the products should the y fail within one year from the first date of shipment.
Fr ont (Po wer Supply) Card Installation 1. Mak e sure the power switch is in the OFF position. 2. Slide the pow er supply card into the front of the chassis. It should meet the rear card when it's almost all the w ay into the chassis. 3. Push the front card gently into the multipin connector on the rear card.
4.0 OPERA TION Once the Model 1000RP Ser ies po wer supply module is properly installed, y ou are ready to operate the unit. Figure 3 (below) sho ws the location of the pow er switch and LED indicators on the A C and DC po wer supply module front cards.
5.0 SERVICE PROCEDURES This section descr ibes the procedures f or P ow er Line V oltage Settings and Fuse Replacement f or Patton Models 1000RPSM-2, 1000RPEM, 1000RPSM-V and 1000RPEM-V . Note: These procedures apply generally to all products listed abov e, which (products) will hencef or th be ref erred to as “the unit”.
8. Replace the spare fuse with one of the appropr iate siz e and rating and close the dr awer . 9. Re-install the po wer cord. (Step #6- 9 for Model 1000RPEM-V) 6. Using a small scre wdr iv er, push in lightly and turn counter clockwise to open the compar tment.
(APPENDIX A - Continued) 1000RPSM-48A/24A/12A (DC Front Card): P ower Suppl y: 48V DC (-48A version); 24V DC (-24A version); 12V DC (-12A v ersion) Input V olta g e: 40-60V DC (-48A version); 18-36V D.
An important point after buying a device Patton electronic 1000RP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1000RP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1000RP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1000RP you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1000RP will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1000RP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1000RP.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1000RP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1000RP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
