Instruction/ maintenance manual of the product 07M2160-QS Patton electronic
Go to page of 8
CopperLink™ Model 2160 Series Long Range Ethernet Extender Quick Star t Guide Part Number: 07M2160-QS, Rev . A Revised: December 14, 2009 Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.com WWW: www .patton.
2 Model 2160 Series Quick Start Guide 1.0 Connect the power and por ts 1. Connect the power adapter to the port labeled DC 9V on the rear panel of the Model 2160. 2. Connect the Ethernet cable to the MGMT port. Note The Model 2160 supports auto-MDX/MDIX switching hub so you may use a straight-through or cross- over Ethernet cable.
Model 2160 Series Quick Start Guide 3 Figure 1. Model 2160 Connection Diagram 2.0 Choose a configuration method and log in There are three methods to configure the Model 2160: serial console, T elnet and Web Browser . Y ou must choose one method to configure the Model 2160.
4 Model 2160 Series Quick Start Guide 2.2 Serial console configuration For configuring the Model 2160 through the serial console, connect a terminal or a PC equipped with a terminal- emulation program (such as Hyper T erminal) to the Model 2160's console port.
Model 2160 Series Quick Start Guide 5 A.3 Industry Canada Notice This equipment meets the applicable Industry Canada T erminal Equipment T echnical Specifications.
6 Model 2160 Series Quick Start Guide Copyright statement Copyright © 2009, Patton Electronics Company . All rights reser ved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.
Model 2160 Series Quick Start Guide 7 NOTES ____________________________________________________________________ ____________________________________________________________________ __________________.
8 Model 2160 Series Quick Start Guide NOTES ____________________________________________________________________ ____________________________________________________________________ __________________.
An important point after buying a device Patton electronic 07M2160-QS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 07M2160-QS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 07M2160-QS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 07M2160-QS you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 07M2160-QS will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 07M2160-QS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 07M2160-QS.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 07M2160-QS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 07M2160-QS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
