Instruction/ maintenance manual of the product MI 49224 Patriot Products
Go to page of 12
704 North Clark Street Albion MI 49224 USA Phone +1 517 629 5990 Fax +1 517 629 5990 www.sepatriot.com Patriot Antenna Systems Assembly Manual for the 1.
CONTENTS INTRODUCTION ........................................................................................................................................ 2 MECHANICAL SYSTEM DESC RIPTION ...........................................................
MECHANICAL SYSTEM DESCRIPTION BACK PACK The antenna is provided in a carrying case measuring approximately 15 x 25 x 12” , and weighs approximately 65 pounds. The back pack case has the added features of having roller wheels and an extendable handl e for easy handling where applicable.
4.
MOUNT ASSEMBLY The pack has two divided compartments. The topmost compartment has an access flap that is easily opened with its’ perimete r zipper. Open this flap and you wil l find the Mount Assembly parts needed for this stage of the assembly. 1. Slide the Feet assemblies into each of the 3 Leg assemblies as shown.
REFLECTOR ASSEMBLY Two of the reflector panels are in the topmost compartment, and the remaining four as well as the feed support parts are in the bottom compartment which can be accessed with the perimeter zipper around the middle of the case. Remove them taking note how they were packed so they can be repacked accordingly.
3. Install panel T2 by simply guiding it into position as shown ont o the alignment dowels. The panel will stay in place. The seam between the panels should look flush.
4. Install panel T1 and B3 using the same procedure as in step 3. 8.
5. Install panel B1 and B3 using the same pro cedure as in step 3. Panels B1 and B3 will need to be held slightly back and aligned simultaneously with their respective upper panel and it’s alignment dowel.
After making sure all seams look flush fasten the tw o latches on the back of the dish, then fasten the six remaining perimeter latches. 10.
FEED ASSEMBLY 1. With all latches securely latched readjust Elevation Angle to facilitate attachment of the Feed Assembly parts. (Appox. 45deg) 2. Insert the Feed Tube assembly into the re ceiver at the bottom of panel B2. It must be held at the approximate angle shown.
3. Attach each side strut. Snap on to side panels first then snap to corr esponding ball snap on the Feed Tube assembly. Assembly is now complete. Antenna system can acquire satellite once RF connections are complete.
An important point after buying a device Patriot Products MI 49224 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patriot Products MI 49224 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patriot Products MI 49224 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patriot Products MI 49224 you will learn all the available features of the product, as well as information on its operation. The information that you get Patriot Products MI 49224 will certainly help you make a decision on the purchase.
If you already are a holder of Patriot Products MI 49224, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patriot Products MI 49224.
However, one of the most important roles played by the user manual is to help in solving problems with Patriot Products MI 49224. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patriot Products MI 49224 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
