Instruction/ maintenance manual of the product PFS 710 Parkside
Go to page of 10
Operation and Safety Notes .............................................................................................. Page 5 PFS 710 Operat ion and Safe t y Notes.
Kompernaß GmbH Burgstraße 21 · D-44867 Bochum (Germany) Last Information Update: 10 / 2006 · Ident.-No.: PFS710-102006-2 / UK / IE D E C F l m n o B A b c d f g h j k i a e.
5 GB/IE Introduction Y our s afet y ............................................................................................................... Page 6 Pro per use ............................................................................
Introd uction / Safety Sabre saw PFS 710 All -pur pos e saw f or hou se an d gard en L Introduction L Y our safety Please make sure you familiarise yourself ful ly wi th t he wa y th e de vice work s bef ore you use it for the first time and that you understand how to handle electrical power tools cor- rectly .
Sa fet y L Workplace-Safety J Keep your workplace clean and tidy . Disorder and poorly lit working areas can lead to accidents. J Do not use this appliance in areas where there is a potential danger of explosions of inflammable liquids, gases or dust.
J Wear suitable c lothing. Do not wear loose clothing or jewellery . Keep your hair , clothing and gloves well away from moving components. Wear a hairnet if you have long hair . Loose, not well-fitting clothing, jeweller y and long hair can become caught up in moving components.
L Understood everything? J When you have made yourself familiar with these general safety instructions for electrical hand tools, and, with the help of the appropria te operating instructions, are familiar with the functions and handling of your electrical hand tool, then you can start with the work.
mounting hole in the saw blade. The blade must not pull out. 3. Firmly retighten the Allen screw f . Check that the saw blade is fixed safely and firmly before taking the appliance into operation. L Blade speed setting wheel With the adjusting wheel a you can pre-select the desired number of strokes (Number of to and fro movements) (MIN.
j The footplate g must al ways be set against the workpiece surface. j Saw through the workpiece using even pressure and speed of progress.
L Dec laration of conformity / Manufacturer We, Kompernaß GmbH, Burgstr . 21, D-44867 Bochum, Germany , hereby declare that this product conforms with the following EC regulations: Mach iner y.
An important point after buying a device Parkside PFS 710 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Parkside PFS 710 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Parkside PFS 710 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Parkside PFS 710 you will learn all the available features of the product, as well as information on its operation. The information that you get Parkside PFS 710 will certainly help you make a decision on the purchase.
If you already are a holder of Parkside PFS 710, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Parkside PFS 710.
However, one of the most important roles played by the user manual is to help in solving problems with Parkside PFS 710. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Parkside PFS 710 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
