Instruction/ maintenance manual of the product PAL-380 Parasound
Go to page of 6
1 O W N E R ' S M A N U A L P A L - 38 0 P reci sion A rch itec t u ra l L ouds pe a k ers www . p a r a s o u n d . c o m.
2 Introduction Congratulations on your purchase of your P AL-380 Precision Architectural Loudspeaker system and thank you for choosing Parasound. The P AL-380s were developed using the finest loudspeaker and crossover components available.
3 For best performance and easier troubleshooting, always “home run” wiring when installing multiple speakers rather than connecting from one speaker to the next. When connecting multiple speakers, make sure that the power amplifier is capable of adequately driving the combined impedance of the speakers.
4 Pre-Drilled Hole for Infrared Receivers The P AL-380 has a 1/2" hole in the bezel to accommodate an infrared receiver such as the Xantech V ideo Link model 490. The hole can be easily accessed by removing the rubber bushing from the rear of the bezel.
5 Swing arms in retracted position Swing arms in locked and mounted position P AL-380 Remov able Bezel High Mid Mid Bass PAL-380 Precision Architectural Loudspeaker P AL-380 Baffle and Driver Assemb l.
6 P AL-380 Precision Architectural Loudspeaker Specifications Frequency Response 36 Hz-22 kHz +/- 2 dB Nominal Impedance 6 Ohms Minimum Impedance 4 Ohms Sensitivity 1 W att/1Meter 89 dB RMS Power Rang.
An important point after buying a device Parasound PAL-380 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Parasound PAL-380 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Parasound PAL-380 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Parasound PAL-380 you will learn all the available features of the product, as well as information on its operation. The information that you get Parasound PAL-380 will certainly help you make a decision on the purchase.
If you already are a holder of Parasound PAL-380, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Parasound PAL-380.
However, one of the most important roles played by the user manual is to help in solving problems with Parasound PAL-380. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Parasound PAL-380 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
