Instruction/ maintenance manual of the product UIM-1000T Paradyne
Go to page of 4
UIM-1000T Gigabit Ethernet Uplink Interface Module 1.0 INSTALLATION 1.1 Unpack and Inspect the Equipment The following components should be included: If there is visible damage, do not attempt to in stall the UIM-1000T; contac t Customer Support at 1- 877-638-2638 (001-603- 427-0600 for international custom ers) or Support@NetToNet.
z Ensure that the mounting holes on the UIM-1000T are lined up with the corresponding pems on the MUM2000-2 circuit board and that the board-to-board connector key pins are properly aligned. z Gently press down on the back end of the UIM- 1000T, over the board-to-board connector.
3.0 ADDITION AL INFORMATION 3.1 LED Indications 3.2 Regulatory Complian ce for Class A Eq uipment The following regulatory compliance information applies to the UIM-1000T as mounted on a MUM2000-2 and installed in one of Ne t to Net Technologies' IP DSLAMs.
protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses an d can radiate radio frequency energy and, if not installed and used in a ccordance with the instruction manual, may cause harmful interference to radio communications.
An important point after buying a device Paradyne UIM-1000T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paradyne UIM-1000T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paradyne UIM-1000T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paradyne UIM-1000T you will learn all the available features of the product, as well as information on its operation. The information that you get Paradyne UIM-1000T will certainly help you make a decision on the purchase.
If you already are a holder of Paradyne UIM-1000T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paradyne UIM-1000T.
However, one of the most important roles played by the user manual is to help in solving problems with Paradyne UIM-1000T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paradyne UIM-1000T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
