Instruction/ maintenance manual of the product UIM-10/100 Paradyne
Go to page of 5
220-0000016 rev01 UIM-10/100 Uplink Interface Module INSTALLATION 1. Unpack and inspect the equipment. The following components should be included: If there is visible damage, do not attempt to connect the device; contact Customer Support at 1-877- 638-2638 (001-603-427-0600 for international customers) or support@nettonet.
220-0000016 rev01 c. Remove the blanking plate* from the selected port. d. Carefully slide the faceplate of the UIM under the lip of the MUM faceplate at the selected port opening such that the UIM circuit board is facedown and the UIM label shows through the port opening with the model name along the right-hand edge.
220-0000016 rev01 c. Remove the blanking plate* from the selected port. d. Carefully slide the faceplate of the UIM under the inside lip of the Mini DSLAM at the selected port opening such that the UIM circuit board is facedown and the UIM label shows through the port opening with the model name along the right-hand edge.
220-0000016 rev01 Additional Information LED Indicators Regulatory Compliance The following regulatory compliance information applies to the UIM-10/100 as installed in a Mini DSLAM chassis or as affixed to a MUM installed in an IP DSLAM chassis.
220-0000016 rev01 European Regulatory Compliance Information for Class A Equipment This Class A product complies with European Norm EN55022. Warning: In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures to correct the situation.
An important point after buying a device Paradyne UIM-10/100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paradyne UIM-10/100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paradyne UIM-10/100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paradyne UIM-10/100 you will learn all the available features of the product, as well as information on its operation. The information that you get Paradyne UIM-10/100 will certainly help you make a decision on the purchase.
If you already are a holder of Paradyne UIM-10/100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paradyne UIM-10/100.
However, one of the most important roles played by the user manual is to help in solving problems with Paradyne UIM-10/100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paradyne UIM-10/100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
