Instruction/ maintenance manual of the product TAM1500-12 Paradyne
Go to page of 8
210-0000025 rev04 TAM1500-12 12-Port T1 Access Multiplexer INSTALLATION 1. Unpack and inspect the TAM1500-12. If there is visible damage, do not attempt to connect the device; contact Customer Support at 1- 877-638-2638 (001-603-427-0600 for international customers) or Support@NetToNet .
210-0000025 rev04 3. Connect the T1 Line(s). Plug the T1 cable into the RJ21 connector for the chosen slot on the back of the IP DSLAM. The TAM1500-12 will connect with remote T1 modems at distances up to 6,000 feet before requiring a T1 repeater.
210-0000025 rev04 ! 192.168.254.252 if the MUM is in slot 13 (IPD12000) or slot 5 (IPD4000) ! 192.168.254.253 if the MUM is in slot 14 (IPD12000) e. Log in with a default username and password (both of which are case sensitive). Please note that General Users have "read only" access; for NMS configuration you must log in as a Superuser.
210-0000025 rev04 Management System Configuration Defaults TAM1500-12 Circuit Defaults Data Storage Configuration backup is inherent in the TAM1500-12. Upon initial power up of the IP DSLAM, the default parameters of the TAM1500-12 will remain in place unless changed through NMS.
210-0000025 rev04 Frame Type Frame type is the T1 data encapsulation method. A frame consists of 193 bits (8-bit samples of each of the 24 T1 channels plus a synchronization bit) transmitted at a rate of 8,000 frames per second (1,544 kbps) across the T1 line.
210-0000025 rev04 0db (Default) Receivers on most newer T1 equipment (repeaters, switches, etc.) can automatically adjust for incoming amplitude, allowing them to run at zero attenuation regardless of distance. -7.5db, -15db or -22db Some older T1 equipment (repeaters, switches, etc.
210-0000025 rev04 (A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid, less constant rate.) Regulatory Compliance FCC Regulatory Compliance Information f.
210-0000025 rev04 Caution: This unit does not contain any user serviceable parts. Repair service and/or warranty information may be obtained by contacting Customer Support at Net to Net Technologies, Inc.: 112 Corporate Drive, Suite 1, Portsmouth, NH 03801 (603) 42 7 -0600 / (877) 638-2638, Contact@NetToNet.
An important point after buying a device Paradyne TAM1500-12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paradyne TAM1500-12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paradyne TAM1500-12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paradyne TAM1500-12 you will learn all the available features of the product, as well as information on its operation. The information that you get Paradyne TAM1500-12 will certainly help you make a decision on the purchase.
If you already are a holder of Paradyne TAM1500-12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paradyne TAM1500-12.
However, one of the most important roles played by the user manual is to help in solving problems with Paradyne TAM1500-12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paradyne TAM1500-12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
