Instruction/ maintenance manual of the product SAM2000G-12 Paradyne
Go to page of 10
SAM2000G-12 12-Port SHDSL Access Multiplexer Also: SAM2000Q-12 (2B1Q) and SAM2000-12 (CAP) 1.0 SDSL ACCESS MODULE MODELS SDSL access multiplexers are in tended for use in Net to Net Te chnologies' IPD12000 and IPD4000 DSLAMs. Model types vary by the SDSL line code utilized.
2.0 INSTALLATION 2.1 Unpack and Inspect the SAM2000G If there is visible damage, do not attempt to conn ect the device; contact Customer Support at 1-877- 638-2638 (1-603-427-0600 for international customers) or support@nettonet.
(pins 13-25 and 38-50 are not used) 3.0 SAM2000G DEFAULT CONFIGURATIONS No configuration is necessary for the SAM2000G to operate at default settings. 3.1 IP DSLAM Management 3.1.1 User Access 3.1.1.1 Network Management System (NMS) and Command Line Interface (CLI) 3.
3.2 SAM2000G Port Parameters 4.0 SAM2000G MANAGEMENT Once your SAM2000G has been installed, bandwidth and other configurations are software selectable via your IP DSLAM's MUM.
4.1 Via Command Li ne Interfac e (CLI) 4.1.1 Establish a Connection With Your IP DSLAM Establish a connection between your IP DSLAM and your PC, either directly (through the COM port on the MUM faceplate) or, if your DS LAM has been configured to allow inband management, across your local network.
4.2.4 Log In Log in with your assigned us ernam e and password. For SAM200 0G configuration, you must log in as a superuser (general users have read only access). If your username and/or password are unknown, contact your System Administra tor or Information Technology Manager for assistance.
The SAM2000G-12, SAM2000Q-12 and SAM2000-12 each have nine SHDSL bandwidth options; default is 272 kbps. Distance capabilities at each bandwidt h vary, dependent upon the type of line code being utilized.
concurrently; SAM2000G configurations cannot be saved independently. Once your IP DSLAM has been configured as desired (including the SAM2000G), settings can be flash uploaded (to a local file) through a Trivial File Transfer Pr otocol (TFTP) tool with a GET command and the following information: 6.
(A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid, less constant rate.) 6.3 Regulatory Complian ce for Class A Eq uipment The following regulatory compliance information applies to the SAM2000G-12, SAM2000Q-12 and/or SAM2000-12 as installed in Ne t to Net Technologies' IP DSLAMs.
210-0000026 rev07 © Copyright 2003 Net to Net Technologies, Inc. ™ The Net to Net Logo i s a trade mark of Net to Net Te chnologie s, Inc. Worldwid e Headq uarters Net to Net Technologies 112 Corporate Drive Portsmouth, NH 03801 USA +1 877-638-2638 http://www.
An important point after buying a device Paradyne SAM2000G-12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paradyne SAM2000G-12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paradyne SAM2000G-12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paradyne SAM2000G-12 you will learn all the available features of the product, as well as information on its operation. The information that you get Paradyne SAM2000G-12 will certainly help you make a decision on the purchase.
If you already are a holder of Paradyne SAM2000G-12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paradyne SAM2000G-12.
However, one of the most important roles played by the user manual is to help in solving problems with Paradyne SAM2000G-12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paradyne SAM2000G-12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
