Instruction/ maintenance manual of the product EAM2000-12 Paradyne
Go to page of 7
210-0000036 rev03 EAM2000-12 12-Port E1 Access Multiplexer INSTALLATION 1. Unpack and inspect the EAM2000-12. If there is visible damage, do not attempt to connect the device; contact Customer Support at 1- 877-638-2638 (001-603-427-0600 for international customers) or Support@NetToNet.
210-0000036 rev03 3. Connect the E1 Line(s). Plug the E1 cable into the RJ21 connector for the chosen slot on the back of the IP DSLAM. The EAM2000-12 will connect with remote E1 modems at distances up to 6,000 feet before requiring an E1 repeater.
210-0000036 rev03 ! 192.168.254.252 if the MUM is in slot 13 (IPD12000) or slot 5 (IPD4000) ! 192.168.254.253 if the MUM is in slot 14 (IPD12000) e. Log in with a default username and password (both of which are case sensitive). Please note that General Users have "read only" access; for NMS configuration you must log in as a Superuser.
210-0000036 rev03 Management System Configuration Defaults EAM2000-12 Circuit Defaults Data Storage Configuration backup is inherent in the EAM2000-12. Upon initial power up of the IP DSLAM, the default parameters of the EAM2000-12 will remain in place unless changed through NMS.
210-0000036 rev03 Frame Type Frame type is the E1 data encapsulation method. A frame consists of 248 bits (8-bit samples of each of the 31 E1 channels plus a synchronization bit) transmitted at a rate of 8,000 frames per second (1,984 kbps) across the E1 line.
210-0000036 rev03 ADDITIONAL INFORMATION LED Indicators (A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid, less constant rate.
210-0000036 rev03 Regulatory Compliance European Regulatory Compliance Information for Class A Equipment This Class A product complies with European Norm EN55022. Warning: In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures to correct the situation.
An important point after buying a device Paradyne EAM2000-12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paradyne EAM2000-12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paradyne EAM2000-12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paradyne EAM2000-12 you will learn all the available features of the product, as well as information on its operation. The information that you get Paradyne EAM2000-12 will certainly help you make a decision on the purchase.
If you already are a holder of Paradyne EAM2000-12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paradyne EAM2000-12.
However, one of the most important roles played by the user manual is to help in solving problems with Paradyne EAM2000-12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paradyne EAM2000-12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
