Instruction/ maintenance manual of the product 9000 Series Paradyne
Go to page of 7
496-15149 TM 1 5-Slot Housing and FrameSaver 9000 Series Access Carrier AC Power Supply Installation Instructions Document Number 9000-A2-GN17-30 August 1998 Before Y ou Begin Both the 5-slot housing and the FrameSaver 9000 Series Access Carrier can hold up to two power supplies.
2 Do I Have the Correct Power Supply? The following ac power supplies are available. Make sure that you have the correct one for your housing and application. NOTE: The 120 V ac power supply has a label to warn you to connect the supply only to a 100–120 V ac power source.
3 Universal Power Supply Front Rear 97-15746 Keyed T echnical Specifications for Universal Power Supply in Access Carrier Specification Criteria Rated Nominal V oltage 100–240 V ac, 50/60 Hz Operating V oltage Range 85–265 V ac, 50/60 Hz Rated Current 4.
4 Installing the Initial Power Supply Install the initial power supply into the top slot. (Use the bottom slot for a second power supply , if desired.) 1. Remove power supply from its shipping box. Handle only by the top and bottom edges to avoid damaging the card.
5 Installing the Redundant Power Supply Install the redundant power supply into the bottom slot. Disconnect power before servicing. 1. Unscrew and remove the filler panel to install a redundant power supply . 2. Remove power supply from its shipping box.
6 Power -Up V erification ! W ARNING: The power cord contains a 3-wire grounding-type plug which has a grounding pin. This is a safety feature. Grounding of the carrier is vital to ensure safe operation. Do not defeat the purpose of the grounding plug by modifying it or by using an adapter .
7 T roubleshooting Power Supply Symptom Possible Cause Solutions No power . The power cord is not securely plugged into the wall receptacle or rear housing connection. Check that the power cord is securely attached at both ends. The wall receptacle has no power .
An important point after buying a device Paradyne 9000 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paradyne 9000 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paradyne 9000 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paradyne 9000 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Paradyne 9000 Series will certainly help you make a decision on the purchase.
If you already are a holder of Paradyne 9000 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paradyne 9000 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Paradyne 9000 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paradyne 9000 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
