Instruction/ maintenance manual of the product 8546 Paradyne
Go to page of 12
TM 1 8546-A2-GN10-20 October 1997 HotWire 8546 Digital Subscriber Line (DSL) Card Installation Instructions Document Number 8546-A2-GN10-20 October 1997 What is a 8546 DSL Card? A Digital Subscriber L.
2 8546-A2-GN10-20 October 1997 T echnical Specifications Specifications Criteria* Size 10.4 inches (L) x 1 1.15 inches (H) x .8 inches (W) Weight Approx. 1.4 lbs. Approvals Safety Certifications Refer to the equipment’s label for approvals on product.
3 8546-A2-GN10-20 October 1997 Cables Y ou Need The following customer-provided cables are used with this product: H Plug-ended T elco 50-pin cable for connection from the HotWire DSLAM Line port to the CO POTS splitter shelf, Main Distribution Frame (MDF), or other demarcation point.
4 8546-A2-GN10-20 October 1997 " Procedur e T o install an 8546 DSL card: 1. Remove the filler plate from the desired slot. 2. Insert the 8546 DSL card into this slot: — For a HotWire 8600 DSLAM chassis – hold the 8546 DSL card horizontally with component side facing up and insert it into the left and right card guides.
5 8546-A2-GN10-20 October 1997 3. Slide the 8546 DSL card into the slot until the power and network connectors seat firmly in the mating connectors on the backplane. CAUTION: Do not force the 8546 DSL card into the slot. If it does not seat properly , remove the card and reinstall it.
6 8546-A2-GN10-20 October 1997 Connecting to a POTS Splitter or an MDF Y ou can connect the HotWire DSLAM chassis containing the 8546 DSL card to a POTS splitter shelf, MDF , or other demarcation point. NOTE: If you are connecting the HotWire DSLAM to a CO POTS splitter , this procedure assumes that the CO POTS splitter shelf is already installed.
7 8546-A2-GN10-20 October 1997 — On a HotWire 8800 DSLAM chassis: SLO TS 13-18 SLO TS 7-12 SLO TS 1-6 97- 15325 Anchor Mount T elco 50-Pin Connector LINES SLO TS 1-6 LINES Shorter T elco Captive Screw 2. Replace the longer T elco cable captive screw with a shorter connector captive screw , which is provided with the HotWire DSLAM chassis.
8 8546-A2-GN10-20 October 1997 Connecting the DSL Cards to the Ethernet Hubs or Switches " Procedur e T o connect the 8546 DSL cards to the Ethernet hubs or switches: 1. Plug the end of an 8-pin modular cable into the appropriate LAN/W AN SLOT port of the chassis.
97-15449 Pin 1 Pin 8 9 8546-A2-GN10-20 October 1997 Pin Assignments HotWir e 8600 DSLAM LAN/W AN Connector Pinouts The 8-pin modular interface for the LAN/W AN 10BaseT connection on a HotWire 8600 DSL.
26 97- 15526 50 1 25 10 8546-A2-GN10-20 October 1997 HotWir e 8600 DSLAM T elco 50-pin Connector Pinouts for DSL Loops and POTS Splitters The T elco 50-pin receptacle on the front panel provides the two-wire loop interface from each 8546 DSL port to either the POTS Splitter shelf or , if the loop is not being shared with POTS, then to the MDF .
26 97- 15323 50 1 25 11 8546-A2-GN10-20 October 1997 HotWir e 8800 DSLAM T elco 50-pin Connector Pinouts for DSL Loops and POTS Splitters The three T elco 50-pin connectors on the 8800 DSLAM Interface.
SYSTEM OK Alrm T est TX RX Coll 1 2 3 4 ETHERNET DSL POR T RADSL 8546 97-15387 12 8546-A2-GN10-20 October 1997 8546 DSL Card LEDs The following table describes the meaning and states of the LEDs on the 8546 DSL card faceplate. T ype LED LED is . . . Indicating .
An important point after buying a device Paradyne 8546 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paradyne 8546 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paradyne 8546 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paradyne 8546 you will learn all the available features of the product, as well as information on its operation. The information that you get Paradyne 8546 will certainly help you make a decision on the purchase.
If you already are a holder of Paradyne 8546, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paradyne 8546.
However, one of the most important roles played by the user manual is to help in solving problems with Paradyne 8546. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paradyne 8546 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
