Instruction/ maintenance manual of the product 1900 Paradyne
Go to page of 160
BitStorm ™ 1900 IP DSLAM Install ati on and Mai nte nanc e Gu ide Docume nt No. 1900-A2 -GN20-00 J u ly 20 02.
A July 2002 1900-A2-G N20-00 Copyright © 2002 Par adyne Corpo ration. All ri ght s reserve d . Prin te d in U .S.A . Notice This pu blic ation is protec ted by f edera l cop yright la w .
1900-A2-G N20-00 July 2002 B Import ant Safety I nstruc tions 1. Read a nd f ollow all warning n otices an d instructions ma rked on the p roduct or i ncluded in the manual .
C July 2002 1900-A2-G N20-00 EMI Notices UNITED ST A TES – EMI NOTI CE: This equi pment has been tes ted and found to comply with the limits for a Class A dig ital de vice, pur suant to P ar t 15 of the FCC ru les.
1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide i T able of Content s About This Do cument Focus an d A u d i e n c e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Relat ed Doc um ents . . . . . . . .
Table of Contents ii Bi tStorm 1900 Installat ion an d Mainten ance Gu ide 1900- A2-GN20-00 10 Mbps CO Modem Card Specifications . . . . . . . . . . . . . . . . . . . . 1-11 10306 CO Modem Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide iii Task 024: Confi gurin g th e MIU . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 2 Task 025: Configuring Remot e Man agement . . . . . . . . . . . . .
Table of Contents iv BitStorm 19 00 Instal lation and Main tenance Guide 1900- A2-GN20-00 Appendix B. Cabling Sp ecifications Cable Connections and Specif icat ions . . . . . . . . . . . . . . . . . . . . .B-115 10306 Modem Card Cabling . . . . . . . .
1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide v List of Figures Figure 1-1: BitStor m 1900 She lf with Cards and Compo nents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Figure 1-2: BitStor m 1900 with 10306 Mode m Cards (Part #: 01 -00153-01) .
List o f Figu res vi BitStorm 19 00 Inst allation and Main tenance G uide 1900- A2-GN20-00 Figure 2-21 : Voice/D ata System Te st Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-97 Figure 2-22 : Data-only System Te st Points .
1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide vii List of T ables Table 1-1: CO Modem Car d LEDs .. ................... ............. ................... .................... ............. ............ ....... .. 1- 6 Table 1-2: Sa me Card B roadcast Fe ature Ena bled/Disabled Fu nction fo r CO Modems .
List o f Tabl es viii BitStorm 19 00 Inst allation and Main tenance G uide 1900- A2-GN20-00.
1900-A2-G N20-00 BitStorm 1900 Inst allation and Ma intenance Gui de ix About This Document Focus and Audience This document c ontains the complete installation and ma intenance procedures for the BitStorm™ 1900 IP DSL Access Multiplexer (IP DSLAM) system.
About This Docu ment x BitStorm 1900 Inst allation and Ma intenance Gui de 1900- A2-GN20-00 • 08-01019-01, S tormT racker – Spe ctrum Manager User Guide This document covers spectral compati b ility and debug/monitor functionality . Conventions The following conventions have been used in preparing this documentation.
Abou t This D ocume nt 1900-A2-G N20-00 BitStorm 1900 Inst allation and Ma intenance Gui de xi Software S teps and Procedures • T ext you are required to type or enter will appear in the document as.
About This Docu ment xii BitStorm 1900 Inst allation and Ma intenance Gui de 1900- A2-GN20-00.
1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-1 1. BitS torm 1900 IP DSLAM Introduction The BitS torm 1900 utilizes patented EtherLoop TM Intelligent Ethernet technology to pro.
1. BitStorm 1900 IP DSLAM 1-2 BitStorm 1900 I nstallati on and Ma intenance Gui de 1900- A2-GN20-0 0 Figure 1- 1: BitStorm 1900 Shelf with Car ds and Co mponents BitS torm 1900 Shel f The BitS torm 1900 Shelf supports 60 to 240 EtherLoop lines.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-3 The BitS torm 1900 shelf and component s are installed in a standard 19” rack and can be installed in 23” racks using optional 23” mounting ears.
1. BitStorm 1900 IP DSLAM 1-4 BitStorm 1900 I nstallati on and Ma intenance Gui de 1900- A2-GN20-0 0 The following table provides information on some common configurations and the number of Filter Shelves required for e ach instal lation.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-5 The following table compares the number of BS1900 systems that can be installed into a standard 7’ .
1. BitStorm 1900 IP DSLAM 1-6 BitStorm 1900 I nstallati on and Ma intenance Gui de 1900- A2-GN20-0 0 CO Modem Cards One BitS torm 1900 shelf supports up to 10 modem cards. Each CO modem card controls the StormPort CPE modems, directing data traffic flow between the CPE modems and the data network.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-7 computer ’ s MAC addre ss is entered into the Privacy Management filter table. NOTE: Crea ting a filt er table on a 10224 CO modem affects all EtherLoop port s on that card and one of its CPEs is redund ant , but possible.
1. BitStorm 1900 IP DSLAM 1-8 BitStorm 1900 I nstallati on and Ma intenance Gui de 1900- A2-GN20-0 0 Spectrum Manager ADSL Protect The Spectrum Manager software makes EtherLoop spectrally compatible with asymm etrical services suc h as ADSL and G .Lite, detecting and protecting against interf erence within the same binder .
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-9 Passes VLAN T agged Frames The BitS torm 1900 is capable of passing 802.1Q tagged Ethernet frames of 1522 bytes. T o implement a VLAN solution, a 802.1Q tagging switch must exist upstream.
1. BitStorm 1900 IP DSLAM 1-10 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 Mixing CO Modem Cards It is possible to fill a BitS torm 1900 shelf with different modem cards (i.e., five 10306 CO modem cards, and five 10224 CO modem cards).
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-11 10 Mbps C O Modem C ard Specifications 10306 CO Modem Card The 10306 CO modem card provides six EtherLoop lines, each with its own dedicated 10 Mbps modem.
1. BitStorm 1900 IP DSLAM 1-12 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 Figure 1-2: BitStorm 1900 w ith 10306 Modem Card s (Part #: 01-00153 -01) 02-17163 10306 CO Modem S.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-13 T able 1-3: System Po wer Spe cifications with 1030 6 CO Mode m * Configuration as sumes 10 mo dem cards are u sed.
1. BitStorm 1900 IP DSLAM 1-14 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 Figure 1 -3: 10306 IP Multicas t Operatio n 02-17164.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-15 The 10306 IP Multicast Operation works in the following manner: 1.
1. BitStorm 1900 IP DSLAM 1-16 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 10224 CO Modem Card The 10224 CO modem card provides 24 statistically multiplexed EtherLoop lines; 12 per single 10 Mbps modem. NOTE: The 10224 is r ecommende d for use on l oops up to 6000’ lo ng.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-17 Figure 1-4: BitStorm 1900 w ith 10224 Modem Card s (Part #: 01-00164 -01) 02-17165 10224 CO Modem Sp.
1. BitStorm 1900 IP DSLAM 1-18 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 T able 1-4: System Po wer Spe cifications with 1022 4 CO Mode m * Configuration as sumes 10 mo dems cards are us ed.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-19 W AN Interface Card Specifications The BitS torm 1900 system supports the MIU (Management Interf ace Unit) W AN interface. MIU (Management Interfac e Unit) The MIU is the recommended W AN interface for the BitS torm 1900.
1. BitStorm 1900 IP DSLAM 1-20 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 Figure 1-5: BitStorm 1900 w ith MIU (Par t #: 01-00 075-01) an d 10306 CO Modems 02-17166 RS-232 RJ.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-21 Figure 1-6: MIU Data Connection BITST RM SERVER BitStorm ™ Ser ver Software Applications Site Manager Spectrum Manager Etc.
1. BitStorm 1900 IP DSLAM 1-22 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 Power Card Specifications The power cards convert the power f eeds to the +12, +5, +3.3, -5 and +2.5 V DC power levels used by the BitS torm 1900 components.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-23 Figure 1-7: 260 W DC Power Card (Par t #: 01-00 080-01) 02-17168 260 W DC Power Card Specifications Description Specification Card Dimensions 12” x 2.
1. BitStorm 1900 IP DSLAM 1-24 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 260 W AC The 260 W AC power card conve rts the 1 10/220 V AC power feed to the power levels used by the 10603 and 10224 CO modem cards and the MIU. Application: Required with 10306 and 10224 CO modem cards with AC power supply .
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-25 Figure 1-8: 260 W AC Power Card (Par t #: 01-00 079-01) 02-17169 ON/OFF FUSE (3A, 250V A C) 260 W AC P ower Card Specifications Description Specification Card Dimensions 12” x 2.
1. BitStorm 1900 IP DSLAM 1-26 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 Fan T ray Specifications The -48V DC fan tray and the 1 10/220V AC (switch selectable) fan tray are used with the BitS torm 1900 in EtherLoop applications to provide forced-air cooling in each chassis.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-27 T able 1-5: Power S pecificatio ns for the AC Fan Tray ! W ARNING: POSSIBLE EQUIP MENT DAMAGE! AC Fan T rays a re shipped w ith an ai r filter frame . T o ensure p roper airflow, the frame mus t be inst alled.
1. BitStorm 1900 IP DSLAM 1-28 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 Fan T r ay -48 V DC Figur e 1-10: Fan Tray -48 V DC (P art #: 01-000 84-01) T able 1-6: Power S pec.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-29 Low-Pass Filter Specif icati ons Filter Shelf Low-Pass filters are used with the BitS torm 1900 in EtherLoop applications where voic e service is require d.
1. BitStorm 1900 IP DSLAM 1-30 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00 Figure 1 -1 1: Filt er She lf (Filter S helf Part #: 01-200 29-01, Filter Card Par t #: 01-2 0029-01, an d Filter 66-Block P art #: 05- 00021-01 ) *Back P anel F ront P anel Filter 66-Block 02-17172 Filter Shelf Specifications Shel f Dimensi ons 5.
1. BitStorm 1 900 IP DSLAM 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 1-31 BitS torm 1900 Compon ent Requirements T able 1-7, “BitS torm 1900 Component Requir e ments,” provides the basic requirements for eac h component within the shelf.
1. BitStorm 1900 IP DSLAM 1-32 BitStorm 19 00 Inst allation and Main tenanc e Guide 19 00-A2-GN20-00.
1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-33 2. BitS torm 1900 Inst allation and T esting The BitS torm 1900 provides EtherLoop CO modems, which communica te with the remote S tormPort CPE modems instal led at the customer premises.
2. Bit Storm 1900 Installati on and Testing 2-34 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 Installation Flow chart Figur e 2-1, "BitS torm 1900 Installation Flowchart." provides a visual flowchart of the BitStorm 1900 inst allation process as a referenc e tool.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-35 Inst allation T ask Lis t The following is a complete list of a ll tasks to perform . T o install the BitS torm 1900 complete each task in the order given.
2. Bit Storm 1900 Installati on and Testing 2-36 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T a sk 00 1: Pre-Inst allation Che cklist Before installing the BitS torm 1900 system, verify that the following steps have been completed: S tep Procedure 1.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-37 S tep Procedure (continued) 5.) V erify a ll necessar y BS 1900 s ystem comp onents, hardwar e, circuit pac ks, and c ables are at the ins tallation site a nd that they are in g ood conditio n.
2. Bit Storm 1900 Installati on and Testing 2-38 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T a sk 00 2: Inst alling the 19” Fan T ra y The 19" fan tray is necessary for a cha ssis housing one or more 10306 or 10224 CO modem cards.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-39 S tep Procedure (continued) Figure 2-2: Fan Tray Mounting 2.) Connect po wer for -4 8 V DC. (If you are installing a n AC fan tray , proceed to step 3 to connec t power for t he 1 10 V AC fan tray .
2. Bit Storm 1900 Installati on and Testing 2-40 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) Figure 2-3: -48 V DC Fan Tray 3.) Connect po wer for the 1 10/2 20 V AC fan tray . a.) Conne ct the powe r cord to the IEC te rminal connecti on on the front panel.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-41 S tep Procedure (continued) 4.) Install the a ir filter f rame. a.) The fi lter mus t be remo ved. b.) Slide th e frame i nto place . 5.
2. Bit Storm 1900 Installati on and Testing 2-42 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T a sk 00 3: Inst alling the BS1900 and Filte r She lves Use this procedure to install the BitS torm 1900 modem shelf and filter shelf.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-43 S tep Procedure 1.) Select a nd appl y grounded anti-sta tic pro tection. 2.) Select t he moun ting poin t in the bay where th e top holes of the shelf mo unting fla nges wi ll be attach ed.
2. Bit Storm 1900 Installati on and Testing 2-44 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 Figure 2-5: BitS torm 1900 Modem Shelves Mounted in Bay 4.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-45 S tep Procedure (continued) Figure 2- 6: BitStorm 1900 S helf Fasten ed to Bay 5.
2. Bit Storm 1900 Installati on and Testing 2-46 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) Figure 2-7: Filter Shelf Mounting in Bay ST OP < RXKDY HFRPSO HWHGW KLVWDVN Filter Shelf 5.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-47 T a sk 00 4: Inst alling the Air Baffle Use this procedure to install the BitS torm 1900 Air Baffle. Requirements This procedure requires the following: • Phillip s-head scre wdriver (#1 or #2) S tep Procedure 1.
2. Bit Storm 1900 Installati on and Testing 2-48 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T a sk 00 5: Inst alling the Circuit Packs Use this procedure to install the BitS torm 1900 circuit packs. Requirements This procedure requires the following: • Grounded anti-static protection S tep Procedure 1.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-49 T a sk 006: Connecting Power to the Shelf Use this procedure to install the power feeds from a -48 V DC or 1 10 V AC power source to the BitStorm 1900 modem sh elf.
2. Bit Storm 1900 Installati on and Testing 2-50 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 3.) With the p ower suppl y turned OFF , c onnect th .
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-51 S tep Procedure (continued) Figure 2-8: Typical DC Power Harness C onnection to -48 V DC ( 260W) P ower Sou rce 4.
2. Bit Storm 1900 Installati on and Testing 2-52 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) NOTE: The redundant pow er supply sourc es connect to two pairs of wires on the BitStorm 190 0’s power ha rness and are electrically the same.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-53 S tep Procedure (continued) 9.) Secu re the pow er harne ss in acc ordance with l ocal office procedu res. 10.) Turn ON the power to the sh elf from t he power sup ply .
2. Bit Storm 1900 Installati on and Testing 2-54 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T a sk 007: Inst alling the Dat a Network C onnection with an MIU Use this procedure to connect the BitStorm 1900 to the Ethernet data network using an MIU.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-55 S tep Procedure (continued) Figure 2- 10 shows a typical EtherLoo p data network c onnection with the B itS tor m 1900 us ing an MIU .
2. Bit Storm 1900 Installati on and Testing 2-56 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 2.) Connect t he 50-pi n connector to the Ethernet Pass- Thru por t, then conne ct the ca bles at th e other en d to the correspo nding switch (e s).
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-57 S tep Procedure (continued) 5.) Procee d accordi ng to the fol lowing tab le: ST OP.
2. Bit Storm 1900 Installati on and Testing 2-58 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T a sk 008: Inst alling V oice/Dat a & Filter Shelf Connections Use this procedure to connect the BitStorm 1900 to the EtherLoop cross-connect in voice/data applications.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-59 S tep Procedure (continued) T able 2-2: P in and Pair Assignmen ts for the Champ to.
2. Bit Storm 1900 Installati on and Testing 2-60 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 4.) Connect on e Amp-Ch amp conne ctor of a n interme.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-61 S tep Procedure (continued) Figure 2-12: Line/CPE and V oice Connections on the Fil.
2. Bit Storm 1900 Installati on and Testing 2-62 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) Figure 2-13: Line/CPE and V oice Connections on the F.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-63 S tep Procedure (continued) 8.) Go to "T ask 01 1: I nstalling E xternal Voice Swit ch Conn ections, on page 70.
2. Bit Storm 1900 Installati on and Testing 2-64 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T a sk 009: Inst alling V oice/Dat a w/Filter 66-Block Connections Use this procedure to connect the BitStorm 1900 to the EtherLoop cross-connect in applications where voice /data service is required with a Filter 66-Block.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-65 S tep Procedure (continued) Figure 2- 14: Voice/Data Filter 66 -Block Conn ections .
2. Bit Storm 1900 Installati on and Testing 2-66 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) Figure 2- 15: Voice/Data Filter 66 -Block Conn ection.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-67 T a sk 01 0: Inst alling the Dat a -only Connections Use this procedure to connect the BitStorm 1900 to the EtherLoop cross-connect in applications wh ere no voice service is required.
2. Bit Storm 1900 Installati on and Testing 2-68 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) Figure 2- 17, "D ata-only Conn ections on th e 66-Bl ock for 1022 4 CO Modem Car ds," on page 69 .
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-69 S tep Procedure (continued) Figure 2- 17: Data- only Connect ions on the 66-Block f.
2. Bit Storm 1900 Installati on and Testing 2-70 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T ask 01 1: Inst alling External V oice Switch Connections Use this procedure to connect the BitStorm 1900 lines to an external voice fac ility .
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-71 S tep Procedure (continued) 8.) Record t he EtherL oop cross -connect Tip/Ring as signments fo r the voice f acili ty accor ding to local office proced ures.
2. Bit Storm 1900 Installati on and Testing 2-72 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T a sk 01 2: Configuring the MIU Complete the following steps to configure the MIU. S tep Procedure 1.) Ensure that the Bi tS tor m 1900 is powered on.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-73 S tep Procedure (continued) Figure 2-18: Craft Connection with the MIU Craft Cable .
2. Bit Storm 1900 Installati on and Testing 2-74 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 4.) Set the s erial COM1 port termi nal communi cation s ettings. a.) Initi ate a T erminal Ses sion using terminal em ulation s oftware (i.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-75 S tep Procedure (continued) 5.) The Craft Interface Login screen d ispl ays. T ype admin for the default Username and press <Enter> .
2. Bit Storm 1900 Installati on and Testing 2-76 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) The BS1900MIU>> promp t disp lays: 7.) For lis t of all avai lable CLI comma nds, type help a t the BS1900MIU>> promp t and press <Enter> .
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-77 DA TE Enter to ch ange the d a te. HELP Enter to ob tain addition al hel p IFCONF IG Use to co nfigure the MIU I.P . Address, Sub net Ma sk, S tatus, Default G ateway etc .
2. Bit Storm 1900 Installati on and Testing 2-78 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 PING Enter to ve rify if an I.P . Address is va lid. RESET Use to Rese t or Reboot t he system. (It is no t ad vi se d to power down the s ys tem i n o rde r to per form a rese t of the sy stem.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-79 S tep Procedure (continued) 8.) T ype menu at the BS 1900MIU >> prompt. The BitStorm 1900 MIU Craft Interface Main Menu displ a ys.
2. Bit Storm 1900 Installati on and Testing 2-80 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 10.) From the Configuration Menu , ty pe a to acce ss the Network Interface Configuration scre en.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-81 S tep Procedure (continued) 12.) T y pe c to selec t Set Time-of-Day Clock . The followi ng screen appears: 13.) Enter the cur rent date and time.
2. Bit Storm 1900 Installati on and Testing 2-82 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) b.) After enter ing the 4- digit ye ar , the c ursor wi ll automa tically jump to th e T ime field. (Th is fiel d is not m arked in t his vers ion.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-83 S tep Procedure (continued) 15.) T y pe a to select Change Username to modify the user name.
2. Bit Storm 1900 Installati on and Testing 2-84 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 16.) T ype a new user nam e, then press <Enter> (a confirmat ion will follow in dicating that the user name h as been s aved).
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-85 S tep Procedure (continued) 19.) Onc e all of th e configu ration paramete rs are ent ered, the s ystem must be res et for the changes to take effect.
2. Bit Storm 1900 Installati on and Testing 2-86 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 20.) T y pe a to selec t Reset System , and then y to confir m.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-87 T a sk 013: Confi guring Re mote Mana ge ment The MIU can be remotely manage d via the management 10Base T -X Ethernet port as shown in Figur e 2-20, "T e lnet Connection for the BitS torm 1900.
2. Bit Storm 1900 Installati on and Testing 2-88 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 Using SNMP Network Management Software If the client is using SNMP Network Manage.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-89 S tep Procedure (continued) 2.) T ype command in the Open: fiel d and cli ck OK . The DOS prompt di splays : 3.) At t h e DOS prom pt type telnet and th e I.
2. Bit Storm 1900 Installati on and Testing 2-90 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 4.) T ype admin for the default Username and press <Enter> . NOTE: The Craft Interfac e is case-sensiti ve.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-91 S tep Procedure (continued) The BS1900MIU>> promp t disp lays: 6.) T ype version to check the curren t firmware ver sion. T o verify this is the lates t version, contact o ur T e chnical Support organiz ation at www .
2. Bit Storm 1900 Installati on and Testing 2-92 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 8.) If any of th e inform ation need s to be mo dified, ty pe: ifconfig -m 0 and pr ess <Enter> . 9.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-93 S tep Procedure (continued) 11 . ) T o view t he cu rrent SNM P parameter s, type sn mp -L and press <Enter> . 12.) V er ify the corr ect Community Name , Poll Inter vals , and Trap Target Addresses .
2. Bit Storm 1900 Installati on and Testing 2-94 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) 14.) From th is screen c hanges to the Community Name , Current Poll Interval , and Set Trap Targets can be ma de.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-95 S tep Procedure (continued) 15.) If cha nges to the configur ation hav e been ma de, the system m ust be reset. T ype reset and press <Enter> , then y to confirm.
2. Bit Storm 1900 Installati on and Testing 2-96 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 T a sk 01 4: T e sting the BitStorm 1900 Inst allation T esting a BitS torm 1900 .
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-97 S tep Procedure (continued) Figure 2-21: Voice/Data Sys tem T est Points BitStorm.
2. Bit Storm 1900 Installati on and Testing 2-98 BitStorm 1900 Ins tallat ion and M aintenanc e Guide 1900- A2-GN20-00 S tep Procedure (continued) Figure 2-22: Data-only System T est Points ST OP <.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 19 00 Installation and Main tenance Guide 2-99 T a sk 015: T esting V o ice Connectivity This procedure checks the voice connectivity in BitStorm 1900 voice/ data applications.
2. Bit Storm 1900 Installati on and Testing 2-100 BitStorm 19 00 Instal lation and Main tenance Guide 1900-A2-GN 20-00 T a sk 01 6: T e sting Data Connectivity This procedure checks data connectivity from the customer premise distribution frame and the BitS torm 1900 shelf.
2. BitStorm 190 0 Installation and Testi ng 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide 2-101 T a sk 017: EtherL oop End-to -End T es ting This procedure checks the EtherLoop system installation, including simultaneous voice and data EtherLoop tests from the modem to the voice and data networks.
2. Bit Storm 1900 Installati on and Testing 2-102 BitStorm 19 00 Instal lation and Main tenance Guide 1900-A2-GN 20-00 S tep Procedure (continued) NOTE: The browser appli cation must be confi gured for "no proxies." Re fer to “Chapter 3. BitStorm 1900 Ma intenance” on pag e 103 for more information.
1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide 3-103 3. BitS torm 1900 Maintenance This chapter contains guidelines and checklis ts for the ma intenance of the BitS torm 1900 system.
3. Bit Storm 1900 Mainte nance 3-104 BitStorm 1900 I n stallation and Maintena nce Guide 1900- A2-GN20-00 Cable Connections It is important to ensure that all connections to the EtherLoop system are firmly seated and secured. An incomplete c onnection at any one point could cause the EtherLoop system to malfunction.
3. BitStorm 1900 Maintenan ce 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide 3-105 Maintenance Checklists V oice/Dat a Con nectivity T roubleshooting C hecklist T able 3-1: V oic.
3. Bit Storm 1900 Mainte nance 3-106 BitStorm 1900 I n stallation and Maintena nce Guide 1900- A2-GN20-00 End-to-End Maintenance C hecklist T able 3-2: End-to- End Mainten ance Chec klist Problem Chec.
1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide A-107 Appendix A. Inst allation Requirement s This appendix describes the facili ty requirements for the B itSt orm 1900 shelf and filter shelf.
Appendix A. Instal lation Requiremen ts A-108 BitStorm 19 00 Installation and Main tenanc e Guide 1900-A2-G N20-00 • The bay must be installed and secured in accord ance with standard telecommunicat.
Appendix A. Ins tallati on Requireme nts 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide A-109 1 10306 configuration assumes a full chassis consisting of a 260 W att AC Power Card, MIU and 10-10306 CO Cards. 2 10224 configuration assumes a full chassis consisting of a 260 W att AC Power Card, MIU and 10-10224 CO Cards.
Appendix A. Instal lation Requiremen ts A-110 BitStorm 19 00 Installation and Main tenanc e Guide 1900-A2-G N20-00 (IBN) environment. Either of thes e environments may use a 1/0 A WG ground collector . The following sections of fer gui delines for each of these environments, with and without ground collectors.
Appendix A. Ins tallati on Requireme nts 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide A-111 Network Support Equipme nt The network support equipment that ma y need to be instal.
Appendix A. Instal lation Requiremen ts A-112 BitStorm 19 00 Installation and Main tenanc e Guide 1900-A2-G N20-00 Inst all ation T ools and Materials The tools and materials required to install the B.
Appendix A. Ins tallati on Requireme nts 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide A-113 BitStorm 1900 Physical Characteristic s This section specifies the physical dimensio.
Appendix A. Instal lation Requiremen ts A-114 BitStorm 19 00 Installation and Main tenanc e Guide 1900-A2-G N20-00 T able A-4: Bi tS torm Opera tional Requireme nts Specification Requir ement Local a .
1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide B-115 Appendix B. Cabling S pecifications This appendix contains the specifica tions for the cabling used with the 10306 and 10224 modem cards in the BitS torm 1900 shelf. The illustrations associated with each of the modem card cabling sections show typical rack layouts.
Appendix B. Cabl ing Speci fications B-116 BitSt orm 1900 Install ation and Main tenance G uide 19 00-A2-GN20-0 0 10306 Modem Card Cab ling Refer to Figur e B-1,“Cabling – Filt er Shelf with 10306 Modem Car ds,” on page 1 16 , for the 10306 cable connections us ing a filter shelf and 66-Block.
Appendix B. Ca bling Specif ications 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide B-117 Figure B-2 : Cabling – Filter 66-Blo ck with 1030 6 Modem Car ds 10306 10306 10306 103.
Appendix B. Cabl ing Speci fications B-118 BitSt orm 1900 Install ation and Main tenance G uide 19 00-A2-GN20-0 0 10224 Modem Card Cab ling Figur e B-3,“Cabling – Filter Shelf w ith 10224 Modem Car ds,” on page 1 18 , for 10224 cable connections using a filter shelf and 66- Block.
Appendix B. Ca bling Specif ications 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide B-119 Figure B-4 : Cabling – Filter 66-Blo ck with 1022 4 Modem Car ds BitStorm 1900 Cable Harness Figur e B-5 (on next page) illustrates the BitS torm 1900 cable assembly (DSUB50P to 10x RJ45).
Appendix B. Cabl ing Speci fications B-120 BitSt orm 1900 Install ation and Main tenance G uide 19 00-A2-GN20-0 0 Decapus Cable Figure B-5: D ecapus Cab le Connect ions MIU Connector La yer 2/3 Switch.
Appendix B. Ca bling Specif ications 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide B-121 AMP-Champ to Dual AMP C hamp Cable The AMP Champ to Dual AMP Champ cable connects from the Filter 66-Block to an AMP Champ Omni Grid cable, which connects to the 10306 cards.
Appendix B. Cabl ing Speci fications B-122 BitSt orm 1900 Install ation and Main tenance G uide 19 00-A2-GN20-0 0 T able B-1: AMP-Champ to Dual AMP-Champ Cable Specifica tions Conn1 Color Code of Cabl.
Appendix B. Ca bling Specif ications 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide B-123 AMP Champ to Dual Omni Grid Cable The AMP Cha mp to Dual Omni Grid c able is used to connect th e Filte r Shelf or Filter 66-Block with 10306 and 10224 C O modem cards to the AMP Champ to AMP Champ cable the cross connect.
Appendix B. Cabl ing Speci fications B-124 BitSt orm 1900 Install ation and Main tenance G uide 19 00-A2-GN20-0 0 T able B-2: AMP C hamp to Dual Omni G rid Cable Specif ications From Conn From Pin # W.
Appendix B. Ca bling Specif ications 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide B-125 Omni Grid to Dual Omni Grid The Omni Grid to Dual Omni Grid ca ble is used to connect the Filter Shelf to 10306 CO modem cards.
Appendix B. Cabl ing Speci fications B-126 BitSt orm 1900 Install ation and Main tenance G uide 19 00-A2-GN20-0 0 T able B-3: Omni Grid to Dual Omni Grid Ca ble Specifications J3 J2 Color J1 B2 BLU/WH.
Appendix B. Ca bling Specif ications 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide B-127 Omni Grid to Omni Grid Cable The omni grid to omni grid cable connects the Filter Shelf to the 10224 CO modem cards.
Appendix B. Cabl ing Speci fications B-128 BitSt orm 1900 Install ation and Main tenance G uide 19 00-A2-GN20-0 0 T able B- 4: Omni G rid to Omni Grid Cable S pecifications From Conn From Pin # Wi th .
Appendix B. Ca bling Specif ications 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide B-129 Intermediate Cable Specifications BitS torm 1900 intermediate (loop extension) cables ca.
Appendix B. Cabl ing Speci fications B-130 BitSt orm 1900 Install ation and Main tenance G uide 19 00-A2-GN20-0 0 Power Cable Harness Figur e B-1 1 (shown below) illustrates the B itStorm 1900 cabl e harness. The BitS torm 1900 power cable assembly connec ts the DC power source to the BitSt orm 1900 shelf.
Appendix B. Ca bling Specif ications 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide B-131 ! W ARNING: POSSIBLE EQUIPMENT DAMAGE ! Reversed polarities on the DC power feed can irreparably damage the BitStorm 1900 shelf component s.
Appendix B. Cabl ing Speci fications B-132 BitSt orm 1900 Install ation and Main tenance G uide 19 00-A2-GN20-0 0.
1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide C-133 Appendix C. Craf t Interface Screens This appendix includes all of the Craft Interfac e screens available fr om the Main Menu.
Appendix C. Craft In terface Sc reens C-134 BitStorm 1900 I nstallati on and Maintena nce Gui de 1900- A2-GN20-00 Configuration Figure C-2: (A. Configuration) Configuration Menu Figure C- 3: (A.
Appendix C. Craft Interface Sc reens 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide C-135 Figure C-4: (A. Configuration) B. SNMP Configuration Menu Figure C-5: (A.
Appendix C. Craft In terface Sc reens C-136 BitStorm 1900 I nstallati on and Maintena nce Gui de 1900- A2-GN20-00 Figure C-6: (A. Configuration, B. SNMP Config uration Menu) B.
Appendix C. Craft Interface Sc reens 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide C-137 St atistics Figure C-8: B. Statistics Menu Figure C- 9: (B.
Appendix C. Craft In terface Sc reens C-138 BitStorm 1900 I nstallati on and Maintena nce Gui de 1900- A2-GN20-00 Figure C- 10: (B. Statistics) B. Physical La yer Statistics Men u Figure C-1 1 : (B.
Appendix C. Craft Interface Sc reens 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide C-139 Figure C-12 : (B. Statistics, B. P hysical Layer Statistics ) B.
Appendix C. Craft In terface Sc reens C-140 BitStorm 1900 I nstallati on and Maintena nce Gui de 1900- A2-GN20-00 Figure C -14: (B. Statistics) D. System M emory Statistics Figure C-15: (B.
Appendix C. Craft Interface Sc reens 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide C-141 Figure C- 16: (B. Statistics) F . S ystem Erro r-Reset Data Figure C- 17: (B.
Appendix C. Craft In terface Sc reens C-142 BitStorm 1900 I nstallati on and Maintena nce Gui de 1900- A2-GN20-00 Firmware V ers ion Information Figure C-18: C.
Appendix C. Craft Interface Sc reens 1900-A2-G N20-00 BitStorm 1900 Ins tallation and Ma intenanc e Guide C-143 Figure C-20: (D. User Account Administrati on) A.
Appendix C. Craft In terface Sc reens C-144 BitStorm 1900 I nstallati on and Maintena nce Gui de 1900- A2-GN20-00 Utilities Figure C-22: E . Utilities Menu Figure C-23: (E.
An important point after buying a device Paradyne 1900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paradyne 1900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paradyne 1900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paradyne 1900 you will learn all the available features of the product, as well as information on its operation. The information that you get Paradyne 1900 will certainly help you make a decision on the purchase.
If you already are a holder of Paradyne 1900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paradyne 1900.
However, one of the most important roles played by the user manual is to help in solving problems with Paradyne 1900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paradyne 1900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
