Instruction/ maintenance manual of the product 880101 ParaBody
Go to page of 10
Serious Steel 880101 WEIGHT STACK OPTION ASSEMBLY INSTRUCTIONS Part #. 6814501.
I IMPOtLTANT NO~ES I ~. WELCOME TO THE WORLD OF St~t/I~$ ~}tt~t~l# Please note: * Thank you for purchasing the Parabody 880101 WEIGHT STACK OPTION. Please read these instructions thoroughly and keep them for future reference. This product must be, as- sembled on a fiat, level surface to assure its proper function.
PARTS LIST ~ PART# DESCRIPTION QTY kEY 1 6814303 UPRIGHT 1 22 2 680(Y~ ADJ" FOOT SUPPORT 1 23 3 681,1(~3 STACKBASE 1 24 4 68 13703 TOP B OOM 1 25 5 6801102 LAT BAR SUPPORT 1 26 6 6816501 76" GUIDE ROD 2 27 7 6274402 LOW ROW B.M:~ 1 28 8 6725302 ’ ’ LATBAR ’" I’ 29 9 3116201 3-1/’2" PUI !.
FIGURE 2 STEP 2: ¯ Insert two 2" END CAP (16) into the ends of the STACK BASE (3) as shown in FIGURE ¯ Attach fou~ 3/4 X 1-1/2" GLIDES (24) to the inside of the tube on the STACK BASE (3) as shown in FIGURE 2 using the following steps: ¯ Thoroughly clean all surfaces where the 3/4 X 1-1/2" GLIDES (24) are to be attached.
FIGURE 6 STEP 6: Insert two GUIDE RODS (6) imo the STACK BASE (3) as sho~ai in.FIGURE 6. Lubricate the GUIDE RODS (6) with a slicon or teflon spray that is available at most hard~are stor~s. ¯ Slide two WEIGftT STACK CUSHIONS (26) dox~ over the GUIDE RODS (6).
FIGURE 4 318 X 4 LOWER CROSS SUPPORT " STEP 4: ¯ NOTEi It may be necessa~" to loosen the 1/2 X 3-1/4" BOLTS of the LOWER CROSS SUPPORT connecting to the IiPRIGI~IT FR.~%IE before beginnlngSTEP 4. ¯ SECURELY assemble the STACK BASE (3) and the UPRIGHT (1) to the LOWER CROSS SUPPORT using two 3/8 X 4" BOLTS (38).
FIGURE 3/8" LOW HEIGHT~ STEP 8: 3/8 X 2-3/4 ¯ SECURELY assemble the LAT BAR SUPPORT (5) to the TOP BOOM (4) using one 3/8 X 2-3/4" (32) and one 3/8" LOWHEIGH~ NUT (29). See HGURE ¯ Slide two VINYL CAPS (22) over the LAT BAK SUPPORT (5) as sho~ in FIGUPOE FIGURE 9 CABLE is routed over bolt! 3/8X2_3/4.
FIGURE 7 ; SUPPORT 3/8 X 2-3/4" 3/8 X 4" STEP 7: ¯ NOTE: It may be necessary to loosen the 1/2 X 3-1/4" BOLTS of the UPPER CROSS SUPPORT connecting the UPRIGHT FRA~IE before be~rming STEP 7.
FIGURE 11 STEP 11: Route the threaded end of the 124" CABLE (I 1) through the slot oft.he UPRIGHT (1) then SECURELY assemble one 4-1/2" PULLEY (10) to the UPRIGHT (I) using m’o 3/8 X 2-3/4" BOLTS (32), two 3/8" FLANGE SPACERS (33), two 3/8" W~_SHERS (30), and LOCK NUTS (31).
FIGURE 10 "(~3/8 X 2" STEP 10: ¯ Screw the threaded end of the CABLE (12) appro~mately 3/4" into the end of the 20 HOLE SELECTOR SI-I.4k-T (39) and tighten nut securely. See FIGURE 10. ¯ PlaCe one 3-1/2" PULLEY (9) into the loop of the CABLE (12) below the second and third PULLEY of the TOP BOOM (4) as in HGURE 10.
An important point after buying a device ParaBody 880101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 880101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 880101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 880101 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 880101 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 880101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 880101.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 880101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 880101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
