Instruction/ maintenance manual of the product 848 ParaBody
Go to page of 18
1 848 LA T OPTION CLASS H PAR T # 7080301 REV . B Revision: 07/10/01 USER’S GUIDE W ARNING: Read and follow all directions for each step to insure proper assembly of this product.
THERE IS A RISK ASSU MED BY IND IVIDUALS W HO USE T HI S TYPE OF EQUIPMENT. TO MINIMIZE RISK F OLLOW THESE RULE S ! 1. Before u sing, read al l the w arnings and in structions on the use of this mach ine. Use only for in tended exercise. DO NOT mo dify the m achine.
IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the ParaBody 848 LA T OPTION. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
4 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 P AR TS LIST PA R T # 6826608 6826908 6825408 6827208 6825502 6275302 6274402 6542402 6824801 3103102 31 16201 6177001 6405201 6467001 6692601 6825101 KEY 1 2 3 .
FIGURE 1 STEP 1: • SECUREL Y assemble the one 3/8 X 2-3/4” BOL T (25), two 3/8” W ASHERS (19), and one 3/8” LOCK NUT (20) to the ST AND (3) as shown in FIGURE 1. • Assemble two 2” SQ. COVER CAPS (14) onto the ends of the ST AND (3) as shown in FIGURE 1.
6 FIGURE 4 STEP 3: • Assemble one 17-1/2” FOAM STRIP (16) to the underside of the CROSS BRACE (4) as shown in FIGURE 3. • Assemble two 2-1/2 X 5-1/2” NON-SKID STRIPS (12) to the CROSS BRACE (4) as shown in FIGURE 3. FIGURE 3 STEP 4: • SECUREL Y attach one 1-1/4” SQ.
7 STEP 5: FIGURE 5 • Slide the CARRIAGE (5) over the UPRIGHT (2) as shown in FIGURE 5. • Assemble the ST AND (3) to the UPRIGHT (2) as shown in FIGURE 5.
STEP 6: FIGURE 6 • SECUREL Y assemble the BASE (1) to the UPRIGHT (2) using one 1/2 X 3” BOL T (27), two 1/2” W ASHERS (21) (slide front washer INSIDE of tube) , and one 1/2” LOCK NUT (22). See FIGURE 6. • Insert one 3 X 2” END CAP (15) and one 2” SQ.
9 STEP 7: FIGURE 7 • Route the CABLE (9) through the UPRIGHT (2) as shown in FIGURE 7. • SECUREL Y assemble three 3-1/2” PULLEYS (1 1) into the slots of the UPRIGHT (2) using three 3/8 X 2-3/4” BOL TS (25), six 3/8” FLANGE SP ACERS (31), and three 3/8” LOCK NUTS (20) as shown in FIGURE 7.
10 STEP 8: FIGURE 8 23 3/8 X 2” 19 19 20 9 8 29 2 5 • Place one 3-1/2” PULLEY (11) into the loop of the CABLE (9) below the second and third PULLEY of the UPRIGHT (2) as shown in FIGURE 8.
11 STEP 9: FIGURE 9 23 3/8 X 2” 19 19 20 9 11 2 • Route the end of the second CABLE (9) through the slot on the UPRIGHT (2) then SECUREL Y assemble one 3-1/2” PULLEY (1 1) to the UPRIGHT (2) using two 3/8 X 2-1/2” BOL TS (24), two 3/8 X 3/8” SP ACERS (30), four 3/8” W ASHERS (19), and two 3/8” LOCK NUTS (20).
12 STEP 10: FIGURE 10 • SECUREL Y assemble the CABLE (9) to the BASE (1) using one 3/8 X 4-1/2” BOL T (26), one 3/8 X 1” SP ACER (32), and one 3/8” LOCK NUT (20) as shown in FIGURE 10.
13 STEP 1 1: FIGURE 1 1 • Attach the LA T BAR (6) to the ball end of the upper CABLE (9) using one 5/16” SNAP HOOK (28) as shown in FIGURE 11. • Attach the LOW ROW BAR (7) to the ball end of the lower CABLE (9) using one 5/16” SNAP HOOK (28) as shown in FIGURE 11.
STEP 12: FIGURE 12 • Tilt the 848101 back and remove the ST AND (3) as shown in FIGURE 12. • T o use the 848101 LA T OPTION: (NOTE: LA T OPTION MUST BE USED WITH A BENCH. LA T OPTION CANNOT BE USED WHILE ST AND IS A TT ACHED. ST AND MUST BE A TT ACHED WITH THE FEET OUT AS SHOWN.
Thank you for pur chasing the Parabody 848 LA T OPTION. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714. BENCH 2 STEP 13: FIGURE 13 • Insert the UPRIGHT (2) of the 848 into the bench as shown in FIGURE 13.
MAINTENANCE MODEL #________________________ SERIAL #_________________________ DA TE OF PURCHASE: _____________ DEALERS NAME: _________________ DEALERS PHONE #_______________ 16 * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water .
17 NOTES: LIMITED W ARRANTY ParaBody extends the following LIMITED W ARRANTY to the original owner of the ParaBody products. The W arranty terms apply to IN HOME USE ONL Y . 1. LIMITED W ARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repair ed or replaced by ParaBody .
INTERNA TIONAL OFFICES LifeFitnessAtlantic BV Atlantic Headquarters Bijdorpplein 25-31 2992 LB Barendrecht The Netherlands Phone: (180) 646 666 Fax: (180) 646 703 LifeFitness Japan 8/F , Nippon Brunswick Building 5-27-7 Sendagaya Shibuya-Ku, T okyo 151-0051 Japan Phone: 81 (3) 3359-4309 Fax: 81 (3) 3359-4307 LifeFitness (UK) Ltd.
An important point after buying a device ParaBody 848 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 848 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 848 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 848 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 848 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 848, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 848.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 848. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 848 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
