Instruction/ maintenance manual of the product 841101 ParaBody
Go to page of 14
Serious Steel 841101 WEIGHT STACK OPTION ASSEMBLY INSTRUCTIONS l Part # 6754401 1 Revision:12/16/97.
] IMPORTANT NOTES[ WELCOME TO THE WORLD OF ~elli~ltU$ ~eel. ~ Please note: * Thank you for purchasing the Parabody 841101 WEIGHT STACK OPTION. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a fiat, level surface to assure its proper function.
KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PART# 6745003 6753703 DESCRIPTION UPRIGHT TOP BOOM 6274402 LOW ROW BAR 6275302 LAT BAR 6609002 LOW ROW ATTACHMENT 6610402 KNEE SUPPORT 6750.
FIGURE 2 STEP 2: ¯ Insert two 2" SQ ENDCAPS (36) Into the ends of the UPRIGHT (1) as shown in FIGURE ¯ SECURELY assemble the LOW ROW ATTACHMENT (5) and the UPRIGHT (1) to the POWER RACK using Vz¢o 3/8 X 3-1/4" BOLTS (27), four 3/8" WASHERS (31), and two 3/8" LOCK NUTS (32).
FIGURE 3 STEP 3 ¯ Slide one 2" SQ. COVER CAP (22) over the end of the WEIGHT STACK BASE (7) as shown in FIGURE ¯ SECURELY assemble the WEIGHT STACK BASE (7) to the UPRIGHT (1) using two 1/2 X 3.
STEP 5: ¯ Insert four CAP PLUGS (21) into the bottom end & top end of the two GUIDE RODS (9) as shown in FIGURE ¯ Securely assemble the WEIGHT STACK SHAFT (13) to the HEAD PLATE (14) using one 3/8 X 1-1/4" BOLT (23) and one WASHER (31). ¯ Insert two GUIDE RODS (9) into the WEIGHT STACK BASE (7) as shown on FIGURE 5.
I FIGURE 6 STEP 6: ¯ Insert two 2 X 3" END CAPS (34) into the TOP BOOM (2) as shown in FIGURE Route threaded end of the LAT CABLE (15) through the TOP BOOM (2) as shown in FIGURE SECURELY assemb.
FIGURE 8 STEP 8: ¯ Route threaded end of the LAT CABLE (15) around the one of the PULLEYS in PLATE & PULLEY ASSEMBLY (17) through the holes in the TOP BOOM (2) as shown in FIGURE SECURELY assemble two 3-1/2" PULLEYS (12) to the TOP BOOM (2) using two 3/8 X 2-3/4" BOLTS (25), figur FLANGE SPACERS (33), and two 3/8" LOCKNUTS (32).
FIGURE 9 3/8 X 3"~ 1/2 X 3"(~~ STEP 9: ¯ Swing the GUIDE RODS (9) under the TOP BOOM (2) as shown on FIGURE ¯ Assemble the TOP BOOM (2) over the GUIDE RODS (9) and SECURELY assemble the TOP BOOM (2) to the UPRIGHT using two 1/2 X 3" BOLTS (28), two 1/2" WASHERS (29), and one 1/2" LOCK NUT (30).
3/8 X 2-3/4"~ I0 STEP 10: Loop the ball end of the LOW ROW CABLE (16) aro " und one 3-1/2 PULLEY (12) and SECURELY assemble the 3-1/2" PUL- LEY (12) to the UPRIGHT (1) using two 3/8 X 2-3/4" BOLTS (25), two 3/8" FLANGE SPACERS (33), two 3/8" (31), and two 3/8" LOCKNUTS (32).
FIGURE 11 STEP 11: ¯ Route the threaded end of the LOW ROW CABLE (16) around the bottom PULLEY of the PULLEY & PLATE ASSEMBLY (17) as shown in FIGURE 11. STEP 12: Screw the threaded end of the LOW ROW CABLE (16) approximately 3/4" into the end ofthepost on the WEIGHT STACK BASE (7) and tighten jam nut securely.
FIGURE 13 STEP 13: ¯ Attach the LAT BAR (4) to the ball end of the LAT CABLE (15) using one SNAP LINK (41) as shown in FIGURE ¯ Slide two 1 X 8" GRIPS (18) over the ends of the LAT BAR (4) as s.
FIGURE 15 STEP 15: Slide two ROLLER PADS (8) onto the KNEE SUPPORT (6), then insert one 1-3/4" SQ. END CAP (37) into the end of the SUPPORT (6) as shown in FIGURE 15.
FIGURE 17 STEP 17: ¯ If upon completion of assembly, the HEAD PLATE (14) does not sit on top of the first WEIGHT PLATE (43), push the, P L ATE ( 14 ) down, insert the WEIGHT STACK P IN (39) and perform several repetitions at the press station. This will relax cable system and prevent the HEAD PLATE (14) from lifting up.
An important point after buying a device ParaBody 841101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 841101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 841101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 841101 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 841101 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 841101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 841101.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 841101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 841101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
