Instruction/ maintenance manual of the product WV-CW504S Panasonic
Go to page of 32
Before attempting to connect or operate this pr oduct, please read these instructions car efully and save this manual for future use. No model number suffix is shown in this manual. Operating Instructions Color CCTV Camera Model No. WV -CW504F/WV -CW504FK WV -CW504S/WV -CW504SK This illustration repr esents WV -CW504F .
2 Pr eface About the user manuals The operating instructions of the camera consist of 2 sets: these operating instructions (PDF) and Installation Guide. This document explains how to configure the settings of the camera. Refer to the installation guide for further information about how to install the camera.
3 Contents Preface ............................................................................... 2 About the user manuals ................................................. 2 T rademarks and register ed trademarks ......................... 2 About the setup menus .
4 About the setup menus Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting ar ea. The following is an example of setup procedur e when LANGUAGE is set to ENGLISH.
5 Basic operation The description below explains how to operate the setup menu basically . The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected video monitor . Refer to the installation guide for further information about the operation buttons.
6 Scr een transition diagram MODEL WV-CW504 CAMERA ID OFF CAMERA SYSTEM BACK-FOCUS SPECIAL LANGUAGE END SETUP ENABLE **CAMERA SETUP** SCENE1 ALC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1.
7 Camera title setting [CAMERA ID] This item specifies the camera title. The camera title that indicates the camera location and other information about the camera is cre- ated with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters.
8 Camera operation setting [CAMERA SETUP] The following describes the camera operation settings. The following settings can be configured on the "CAMERA SETUP" screen displayed from the top scr een. Refer to page 5 for how to call up the screen.
9 Step 5 Move the cursor to "SCENE1" and press the right or left button to select "SCENE1" to r esume normal operation. 2. Light quantity control method selection [ALC] The method of controlling the quantity of light is selected fr om the following.
10 Note: • When"ON"or"ON(i-VMD)"isselectedfor"SUPER-D5",thefollowingsettingswillberestricted. SHUTTER: Only OFF and 1/100 are available. ( ☞ page 11) SENS UP: Only "OFF" and "AUTO" become available.
11 Step 2 Mask bright areas. Use the up, down, right, and left buttons to select an area to be masked and press the setting button. When the selected ar ea is masked, the masked area will start blinking (between stripes and white screen). When selecting another area after masking, the masked area will be edisplayed in white.
12 4. Gain control setting [AGC] Select a gain control setting fr om the following. ON (HIGH) (default)/ON (MID)/ON (LOW): Automatically increases the gain to make the screen brighter when the illuminance of the subject becomes darker . HIGH, MID and LOW indicate the gain level.
13 When "AWC" is selected, follow the steps below to adjust the white balance. Step 1 Set "WHITE BAL" to "AWC" and press the left button to change to "A WC → PUSH SW". Step 2 Press the setting button and adjust the white balance.
14 7. Digital noise reduction function setting [DNR] The digital noise reduction function r educes noise automatically under the condition of low illuminance.
15 Step 4 Move the cursor to "DURA TION TIME" and select a time for switching between color and black-and-white images from the following: (default: 10 seconds) 2 sec.
16 Perform the settings relating to the motion detection Perform the settings relating to the motion detection as follows. It is possible to detect only objects that moves to the direction speci- fied in advance or objects that keeps on moving for a certain duration.
17 Step 6 Set the detection sensitivity and the minimum size of objects detected. Perform the setup while viewing the detection result displayed on the screen.
18 Step 4 Move the cursor to "AREA" and select the area for which the detection of appearance/disappearance of stationary objects is to be set. ALL (default): All areas will be set as the detection ar ea. SETUP: When the setting button is pressed after selecting "SETUP", up to 2 areas can be set as the detection area.
19 Step 4 Use the up, down, right, and left buttons to determine the left upper position of the area to be set and pr ess the setting button. Note: • Theareacorrespondingto the.
20 Configure frame display Follow the procedur e below . Step 1 Move the cursor to "i-VMD" and press the setting button. → The "i-VMD SETUP" screen appears. Step 2 Move the cursor to "INDICA TOR" and determine whether or not to display a frame around the screen fr om the following.
21 Camera system setting [SYSTEM SETUP] Performs the settings relating to the camera system such as synchr onization, alarm input/output terminal, and privacy zone. The following settings can be configured on the "SYSTEM SETUP" screen displayed from the top screen.
22 Step 1 Set "SYNC" to "LL" and press the setting button. → The "SYNC" screen appears. Step 2 Connect the video output signal and external synchronizing input signal of the camera to a 2-input oscilloscope, and move the cursor to "COARSE".
23 Step 3 Move the cursor to "POSITION" and press the setting button. Step 4 Use the up, down, right, and left buttons to determine the left upper position of the zone to be set and press the setting button.
24 14. Electronic zoom setting [EL-ZOOM] Select "On" or "Off" to determine whether or not to use the electr onic zoom. When "ON" is selected, the zoom factor and the panning/tilting settings can be configured. ON: Uses the electronic zoom.
25 Back focus setting [BACK-FOCUS SETUP] Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the "BACK-FOCUS SETUP" screen displayed fr om the top screen. Refer to page 5 for how to call up the scr een.
26 Step 3 Move the cursor to "C/L ← → B/W" and select the back focus adjustment type from the following: AUTO (default): Adjusts the back focus function automatically and corrects out of focus when switching between color and black- and-white images.
27 Special menu setting [SPECIAL SETUP] The special menu setup is performed including the setting of the camera image quality and the communication configuration when a receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen.
28 Flaw compensation [PIX OFF] Flaws in the displayed camera image are corr ected. Up to 16 points can be corrected. Follow the procedur e below . Step 1 Move the cursor to "PIX OFF" and press the setting button. → The "PIX OFF" screen appears.
29 Language selection [LANGUAGE SETUP] A language for the setup menu is selected from the following: The language selection can be made on the "LANGUAGE SETUP" screen displayed fr om the top screen. Refer to page 5 for how to call up the scr een.
30 Shortcut operation Use of a system contr oller with the "camera function" button allows users to perform the shortcut settings with use of the numeric keypad and camera function button.
31 System controller operation Setting contents [2]+[1]+[1]+[Camerafunction] Scene change ON [2]+[1]+[2]+[Camerafunction] Scene change OFF [2]+[1]+.
Panasonic System Solutions Company , Unit Company of Panasonic Corporation of North America www .panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic W ay 2H-2, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www .
An important point after buying a device Panasonic WV-CW504S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic WV-CW504S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic WV-CW504S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic WV-CW504S you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic WV-CW504S will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic WV-CW504S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic WV-CW504S.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic WV-CW504S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic WV-CW504S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
