Instruction/ maintenance manual of the product WV-CW474S Panasonic
Go to page of 10
1. Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Ask qualified service personnel for servic- ing. 2. Handle the camera with care. Do not abuse the camera.
1. The following functions are built in. (1) Auto Light Control (ALC) (2) The SUPER-D 2 function eliminates interference by strong background lighting which makes the camera picture dark, such as a spotlight.
Cautions: 1. Connect to 24 V AC (19.5 V-28 V) class 2 power supply only. Make sure to connect the grounding lead to the GND terminal when the power is supplied from a 24 V AC power source. 2. To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for the Input Terminal.
1. CAMERA SETUP MENU This camera utilizes an on-screen user setup menu. • Opening the Setup Menu Press and hold down I (S) for 2 seconds or more. The CAM SET UP menu appears on the monitor as shown at right. Check the current settings on the menu. Refer to the following sections for a detailed description of menu items.
1. Camera Identification (CAMERA ID) Setting You can use the camera identification (CAMERA ID) to assign a name to the camera. The camera ID consists of up to 16 alphanumeric characters. The camera ID display can be switched on or off on the monitor screen.
2-2. ALC Mode with SUPER-D2 OFF 1. Move the cursor to SUPER-D2 and select OFF. The MASK SET appears on the menu. 2. Move the cursor to MASK SET and press I (S). The 48 mask areas appear on the monitor screen. The cur- sor is blinking in the upper left corner of the screen.
6. Synchronization Setting (SYNC) You can select internal sync (INT) mode, line-lock (LL) mode or the VD2 signal (multiplexed vertical drive signal) mode. Important Notices: 1. The priority for the sync modes is as follows: (1) Multiplexed Vertical Drive (VD2) (Highest priority) (2) Line-lock (LL) (3) Internal Sync (INT) (Lowest priority) 2.
.
9-6 Electronic Zoom (EL-ZOOM) 1. Move the cursor to EL-ZOOM. 2. Select ON or OFF using I (L) or I (R). The factory default setting is OFF. ON: x2 electronic zoom is available with the ZOOM switch on the controller. OFF: The electronic zoom function is disabled.
Pick-up Device: 768 (H) x 494 (V) pixels, Interline Transfer CCD Scanning Area: 4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of 1/3 ” pick-up tube) Scanning: 525 lines/60 fields/30 frames Horizontal: 15.734 kHz Vertical: 59.94 Hz Synchronization: Internal, Line-locked or Multiplexed vertical drive (VD2) Sync selectable Video Output: 1.
An important point after buying a device Panasonic WV-CW474S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic WV-CW474S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic WV-CW474S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic WV-CW474S you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic WV-CW474S will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic WV-CW474S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic WV-CW474S.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic WV-CW474S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic WV-CW474S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
