Instruction/ maintenance manual of the product WV-CP500 Panasonic
Go to page of 32
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this manual. This illustration repr esents WV -CP500. Lens: Option Installation Guide Color CCTV Camera Model Nos.
2 CAUTION: TO RE DUC E THE RI SK OF EL ECT RIC S HOC K, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
4 Limitation of liability THIS PUBLICA TION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED W ARRANTIES OF MERCHANT ABILITY , FITNESS FOR ANY P ARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD P ARTY'S RIGHT .
5 Preface This product is a 1/3-inch type {1/3"} CCD color CCTV camera. Connection of this product to a video monitor allows users to use this product as a monitoring camera.
6 About the user manuals Trademarks and registered trademarks The operating instructions of the camera consist of 2 sets: this book and operating instructions (PDF). This book explains how to install the camera. Refer to the "Operating Instructions (PDF)" on the provided CD-ROM for descriptions of how to perfor m the unit settings.
7 Contents Important safety instructions....................................................................................................... 3 Limitation of liability .................................................................................
8 Precautions This product has no power switch. Power is supplied from an exter nal 12 V DC/ 24 V AC (WV -CP504) or 120 V AC (WV - CP500) power-supply device. Refer to ser - vice personnel for how to turn on/off the power . Use this product for indoor use only.
9 Major operating controls and their functions (UP) (LEFT) (RIGHT) (DOWN) (SET) NEAR FA R BF/MENU Side view (WV -CP500) Side view (WV -CP504) ALC lens connector Inside the side cover (Slide the cover leftward to the lock position.
10 POWER ALARM OUT ALARM IN GND VIDEO OUT 120V ~ 60Hz Operation buttons* : Up button (UP) : Down button (DOWN) : Left button (LEFT), NEAR : Right button (RIGHT), F AR : Setting button (SET), BF/MENU *.
11 Side cover (only for WV-CP500) When the operation buttons are used, the side cover is slide leftward to the lock posi- tion. ALC lens connector The ALC connector is connected to this ALC lens connector . Tripod mount base This socket is used to mount the camera mount bracket (option).
12 Precautions for installation This camera is designed to be used indoors. This camera is not operable out- doors. Do not operate this product beyond the specified temperature, humidity or power source ratings. Use this product at temperatures within –10 °C to +50 °C {14 °F to 122 °F}, and humidity below 90 %.
13 Power cord (only for WV-CP500) Connect the power cord securely . Run the power cor d so that no load is applied to the cord when panning or tilting the camera. (Failure to observe this may disconnect the power cord, and accordingly no image is dis- played.
14 Installation and connection z Rotate the lens (option) clockwise slowly to mount the lens. Important: • ForuseofC-mountlens,usetheC-mountadaptor(option). • For preventionof damage to the camera body , use a lens with protrusionof 5.
15 ALC lens connector 1 3 2 4 Screws (locally procured) Screws (locally procured) <Installation sample on a ceiling> Camera mount bracket (option) x Connect the lens cable to the ALC lens connector of the camera.
16 • Themountingconditionsofthecameramountbracketaredescribedasfollows: For some applicable mount brackets, "A" is attached to the model number . The mounting condi- tions are the same even for the A-attached models.
17 v The video output cable is connected to this video output connector. Important: • Besuretoturnoffthepowerofeachdevicebefor econnection. • Besuretosecur ethecoaxialcableconnectors.
18 External synchronization switch The settings of the alarm input/output are configured on the SETUP menu. Refer to the network operating instructions (PDF) for further infor mation. Important: • Besuretoturnoffthepowerofeachdevicebefor econnection.
19 n Turn on the power. WV-CP500 The included power cord is connected to this power connector . Connect between the power connector on the rear side of the camera and a plug socket with the supplied power cord.
20 m Adjust the camera angle by loosening the screw of the camera mount bracket while viewing the video monitor. Be sure to loosen the screw of the camera mount bracket when the camera angle is adjust- ed.
21 e T o perfor m fine adjustment of the back focus after automatic back focus adjustment, use the right or left button. (No operation for 10 seconds or more closes the setup menu.
22 Setup menu Perfor ming each setting item in the setup menu should be completed in advance to use this unit. Per form the settings for each item in accordance with the conditions of the camera shoot- ing area. Refer to the operating instructions (PDF) for further infor mation.
23 Setup item Description SPECIAL CHROMA GAIN Adjusts the chroma level. AP GAIN Adjusts the aperture level. PEDEST AL Adjusts the pedestal (brightness) level.
24 Screenshot 2 The setup mode changes to "ENABLE", and the setup menu becomes ready to be set. Step 3 Move the cursor to the item to be set, and press the setting button. Screenshot 1 Hold down the setting button for approx. 2 seconds to call up the top screen of the setup menu.
25 Screenshot 3 The selected setup screen in the setup menu appears on the screen. Note: • If t he to p s cr ee n o f t he se t up me nu is called up with the operation buttons while a camera image is displayed, the setup mode is always "DISABLE" to pre- vent operation errors.
26 Screen transition diagram MODEL WV-CP500 SERIES CAMERA ID OFF CAMERA SYSTEM BACK-FOCUS SPECIAL LANGUAGE END SETUP ENABLE **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHI.
27 • Arethepowercordandcoaxialcable connected appropriately? → Check whether the connection is appropriately established. Cause/solution • Isthemonitor brightness appropriately adjusted, or is the contrast appropri- ately adjusted? → Check whether the monitor settings are appr opriate.
28 • Thepowercord, power connector , or power plug is damaged. Use of the damaged cord, connector , or plug may cause electric shock or fire.
29 Specifications • General Power source: WV -CP500: 120 V AC 60 Hz WV -CP504: 24 V AC 60 Hz, 12 V DC Power consumption: WV -CP500: 3.2 W WV -CP504: 24 V AC: 3.6 W , 12 V DC: 310 mA Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F} Ambient operating humidity: Less than 90 % (non condensing) Video output: VBS: 1.
30 Functions: Camera title: Up to 16 characters (alphanumeric characters, marks) Light control mode setting: ALC/ALC+/ELC Super Dynamic 5 ON/ON (i-VMD)/OFF Electronic shutter speed: OFF (1/60), 1/100,.
31.
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America www .panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic W ay 2H-2, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www .
An important point after buying a device Panasonic WV-CP500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic WV-CP500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic WV-CP500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic WV-CP500 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic WV-CP500 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic WV-CP500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic WV-CP500.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic WV-CP500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic WV-CP500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
