Instruction/ maintenance manual of the product WV-CP470 Panasonic
Go to page of 12
1. Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Ask a qualified service personnel for servic- ing. 2. Handle the camera with care. Do not abuse the camera.
1. The following functions are built in. (1) Auto Light Control (ALC)/Electronic Light Control (ELC) (2) The SUPER-D 2 function eliminates interference by strong background lighting which makes the camera picture dark, such as a spotlight. Dynamic range of 46 dB.
Copper wire #24 #22 #20 #18 size (AWG) (0.22mm 2 ) (0.33mm 2 ) (0.52mm 2 ) (0.83mm 2 ) Length (m) 95 150 255 425 of Cable (Approx.) (ft) 314 495 842 1 403 Video Cable 1. It is recommended to use a monitor whose resolution is at least equal to that of the camera.
Mounting the Lens Note: Before you mount the lens, loosen the screw on the side of the camera, and rotate the ring clockwise until it stops. If the ring is not at the end, the inner glass or CCD image sensor may be damaged. 1. Mount the lens by turning it clock- wise on the lens mount of the cam- era.
Left Button Set Button Right Button Down Button Up Button Up Button ( J ) : Moves the cursor upwards. Use this button to select an item or adjust the parameters. Down Button ( K ) : Moves the cursor downwards. Use this button to select an item or adjust the parameters.
(To be continued reverse page) SETTING PROCEDURES Notes: • The CAMERA ID stops at the edges of the monitor screen. • The CAMERA ID moves faster if any of L / M / J / K is kept pressed for a sec- ond or more. 2. Light Control Setting (ALC/ELC) You can select the mode for adjusting the lens iris.
2-2. ALC Mode with SUPER-D2 OFF and ELC Mode Note: If ELC is selected, set MASK SET according to this procedure. 1. Move the cursor to SUPER-D2 and select OFF. (When you select ELC, SUPER-D2 is not available.) The MASK SET appears on the menu. 2. Move the cursor to MASK SET and press I .
6. Synchronization Setting (SYNC) You can select internal sync (INT) mode or line-lock (LL) mode. Additionally, this model accepts the VBS signal (composite color video or blackburst signal) and VS signal (B/W composite video or composite sync signal).
5. Supply the video output signal of the camera to be adjusted and the refer- ence gen-lock input signal to a dual- trace oscilloscope. 6. Set the oscilloscope to the horizontal rate and expand the horizontal sync portion on the oscilloscope. 7. Move the cursor to H PHASE.
Manual Fine Adjustment for AWC (ATW) You can set the white balance items manually. 1. To set MASK SET, proceed as described in steps 2 to 4 of “ ALC mode with SUPER-D2 OFF and ELC mode ” . 2. Move the cursor to R. 3. Press L or M to obtain the optimum amount of red gain.
1. Move the cursor to BW. 2. Select AUTO1, AUTO2, EXT, ON or OFF using L or M . AUTO1: The camera selects black and white mode if the picture is dark, or color mode if the picture is bright enough. Note: Color picture switches to black-and-white picture and vice versa in approxi- mately 1 or 2 minutes after detection of illuminance.
Pick-up Device: 771 (H) x 492 (V) pixels, Interline Transfer CCD Scanning Area: 4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of 1/3 ” pick-up tube) Scanning: 525 lines/60 fields/30 frames Horizontal: 15.
An important point after buying a device Panasonic WV-CP470 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic WV-CP470 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic WV-CP470 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic WV-CP470 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic WV-CP470 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic WV-CP470, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic WV-CP470.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic WV-CP470. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic WV-CP470 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
