Instruction/ maintenance manual of the product WV-BP142 Panasonic
Go to page of 4
1. The following functions are built in. (1) Auto Light Control (ALC)/Electronic Light Control (ELC) (2) Back Light Compensation (3) Line-locked Sync or Multiplexed Vertical Drive (VD2) (only for WV-BP140 and WV- BP144)/Internal Sync or VD2 (only for WV-BP142) 2.
Caution: To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for the DC 12 V or AC 24 V Input Terminal. Cautions: • Connect to 12 V DC (10.
Copper wire size (AWG) Copper wire size (AWG) Length of Cable (Approx.) CONNECTIONS A. WV-BP140 (120 V AC 60 Hz) Connect the power cord to an electrical outlet of 120V AC 60Hz. B. WV-BP142 (12 V DC) Connect the power cord to the DC 12V IN ter- minal on the rear panel of the WV-BP142.
Pick-up Device: 510 (H) x 492 (V) pixels, Interline Transfer CCD Scanning Area: 4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of 1/3” pick-up tube) Synchronization: WV-BP140 and WV-BP144: Line-l.
An important point after buying a device Panasonic WV-BP142 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic WV-BP142 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic WV-BP142 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic WV-BP142 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic WV-BP142 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic WV-BP142, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic WV-BP142.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic WV-BP142. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic WV-BP142 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
