Instruction/ maintenance manual of the product WS-AT300 Panasonic
Go to page of 12
Speak er Syst em WS-A T300 Subwoof er Syst em WS-A T350 Before attempting to connect or operate this product, please read these instructions completely CONTENTS REGULATORY STATEMENTS ....................................................................
-2- Please observe the following instructions carefully for your own safety and that of equipment. • If the speakers fall, it can cause serious damage to persons or properties. • Read the instructions printed on the back of the speakers. • Ask your nearest dealer or qualified installers for installation and wiring.
-3- WS-A T300 • This speaker system is a 2-way bass-reflex type incorporating a 38-cm (15”) woofer and a Square Contour Wave Guide (SCWG) horn tweeter. • The speaker system accepts a continuous program input of 400 W or 200 W(RMS). It delivers high outputs from its compact body with a maximum sound pressure level of 122 dB.
-4- • Changing the tweeter direction You can alter the directivity when placing the WS- AT300 horizontally. 1. Unscrew four bolts to detach the tweeter. 2. Turn the tweeter by 90˚. 3. Tighten four bolts to attach the tweeter again. 4. Rotate the RAMSA badge by 90˚.
-5- • On wall or ceiling You can install the speaker on a wall or ceiling with a mounting bracket (not supplied). q Place the bracket on the enclosure. w Screw the eye bolts into the screw holes of the enclosure by hand. e Fix the speaker to a wall or ceiling.
-6- You can find the TS (tip-sleeve) phone jack and SPEAKON connector on the back of the enclosure. These two are usable as input or output terminals since they are wired in parallel. See the block diagram on page 9. CONNECTING SPEAKER CABLES Notes: • Do not connect more than two speakers in parallel.
-7- WIRING CONNECT OR AND CABLE Cap Cable clamp Cable clamp Loosen screws. Push Cable Tighten the screw. Solder here. Push to the end. Convex Convex Cocave Cocave Cap AMP OUT SPEAKON +1 + 1 – (Not u.
-8- SETTING THE SUBWOOFER PROCESSOR PROTECTION CIRCUITS FOR WS-A T300 SYSTEM DIAGRAM Audio Mixer WS-SP2A Subwoofer Processor In A In B Amplifier Amplifier Amplifier 200W 200W 400W BTL 400W BTL WS-AT300 WS-AT350 -50 - -40 - -50 - -40 - • The WS-AT300 has separate overload protection circuits for woofer and tweeter.
-9- WS-AT300 WS-AT350 Type 2 Way, Bass-reflex type Bass–reflex type Input impedance 8 ohms Power capacity 400 W (continuous program input) 400W (RMS) 200 W (RMS) — Sound Pressure Level 99 dB [1 W, 1m (3.3 ft)] 92 dB [1 W, 1m (3.3 ft)] Max. Sound Pressure Level 122 dB [1m (3.
-10- TYPICAL PERFORMANCE 10 20 30 40 50 60 70 90 80 100 110 20 50 100 200 500 1000 2000 5000 10000 20000 (dB) (1w, 1m) Frequency response 2nd harmonic distortion Impedance 3rd harmonic distortion 8 .
-11- APPEARANCE -50 - -40 - 150 380.5 [15] 2-M8 150 [5-7/8] 217 [8-9/16] 2-M8 φ 38.1 [φ 1-1/2] 480 [18] 688 [27-1/16] 694 [27-5/16] 150 [5-7/8] 2-M8 (both side) [5-7/8] ■ WS-A T300 150 150 [5-7/8] 2-M8 φ 38.
Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America RAMSA/Professional Audio Systems Executive Office: One Panasonic Way, Secaucus, New Jerjey 07094 6550 Katella Ave. 17A-7, Cypress, CA 90630 (714) 373-7277 PANASONIC CANADA INC.
An important point after buying a device Panasonic WS-AT300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic WS-AT300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic WS-AT300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic WS-AT300 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic WS-AT300 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic WS-AT300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic WS-AT300.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic WS-AT300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic WS-AT300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
